Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steering Box Seal

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Steering Box Seal

Post by Clint »

Has anyone replaced the seal where the steering shaft goes into the steering box (power steering)?
Mine has started to leak over the weekend and was wondering if there were any tips or tricks to replacing it.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

Replaced the seal on the weekend.

Seal is a AP8096E double lip seal 19mmIDx32mmODx7mm wide, about $6 each.
Daihatsu does not recognise that this seal exists so had to get it from a bearing/seal mob (SKF, CBC etc)

Accessed steering box through drivers side wheel arch.
Removed unijoint from steering box input shaft
Wiped all the crap from around outside of seal and spline.
Marked steering box nut location with centrepunch mark. (so i can get the same preload/clearance on bearing when tightening)
Unscrewed nut using a pin punch (p/s fluid runs out untill resevoir is empty)
Removed old seal from nut and put in new one.
Tightened back up to mark.
Put steering shaft back on.
Bled p/s system and all is good again..

Hope this helps the next bloke who has to do it.

Image
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Thanks for sharing the info, will add it to my manual.
Top
Posts: 327
Joined: Wed Apr 05, 2006 7:44 am
Location: Greece

Contact:
Contact ferozamaniac

Post by ferozamaniac »

That was a problem some months ago but i didnt know that SKF had that stuff. I just gave 10 euro to fix it to an engineer with the same part.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I was doing some research on the weekend and according to the manual the steering box has it's own oil supply and should be checked regularly!

(So, if you've had a leak it would pay to take the top inspection plug out and check you've still got oil in it.)
David
Top
Posts: 222
Joined: Thu Jul 24, 2003 9:26 pm
Location: Boyne Island (Near Gladstone)

Post by Clint »

murcod wrote:I was doing some research on the weekend and according to the manual the steering box has it's own oil supply and should be checked regularly!

(So, if you've had a leak it would pay to take the top inspection plug out and check you've still got oil in it.)
I think you wil find that is for the normal steering box.

The powersteering box uses the powersteering fluid as the lube as well as for the hydraulic function.
Clint,
Limited Edition 95 Roza & 2006 ST Patrol Coil Cab Ute.... both a work in progress.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Ahhh... OK, you might be right there as I forgot about some being non assisted.

BTW I just checked the manual and it isn't too clear. :?
David
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 5 guests