Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
vitara 1.6 engine and gearbox into sierra
vitara 1.6 engine and gearbox into sierra
can anyone clarify or confirm or correct that a vitara gearbox bolted to the 1.6 will go into a sierra with the transfer removed and jack shaft from the sierra fitted to output shaft of the gearbox. i think this is what i saw in a zook many moons ago when i was less informed and was not too sure what i was looking at. i'm thinking if it was that easy more people would have done it
Last edited by mr green on Tue Aug 07, 2007 8:44 pm, edited 1 time in total.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
It is the case for the trimatic I have sitting under my 1.3, and Mugginsmoo's AW4 auto.
It will require a custom rear cover plate and some sort of seal/carrier bearing. I agree, I think this is a better idea than an engine to gearbox conversion.
Steve.
It will require a custom rear cover plate and some sort of seal/carrier bearing. I agree, I think this is a better idea than an engine to gearbox conversion.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
3 ways -
Vitara trimatic or AW-4 used with a vitara engine conversion plate "back to front." Shifting the AW-4 would take a control box or a atand alone version like that used in diesel/carby hiace/hilux's
A G13BB 4 speed auto from a jimny (but best done with a whole jimny engine/gearbox due to shifting problems)
A japanese market 3 speed auto from an import. I believe they are fully mechanical. Mud4B has had some experience with this gearbox from memory.
Steve.
Vitara trimatic or AW-4 used with a vitara engine conversion plate "back to front." Shifting the AW-4 would take a control box or a atand alone version like that used in diesel/carby hiace/hilux's
A G13BB 4 speed auto from a jimny (but best done with a whole jimny engine/gearbox due to shifting problems)
A japanese market 3 speed auto from an import. I believe they are fully mechanical. Mud4B has had some experience with this gearbox from memory.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
don't think i was looking at an auto and was definatly 1600. it was for sale at the gate at tt05 and was advertised with vtara 1.6 but the gearbox looked just like a standard box with no tranfer( no extension housing) looked funny but i suppose it still had a seal and bearing
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic
to fit the AW4 into a 1.3L sierra you will need to widen the tunnel by 60mm on the drives side and 50mm on the pasengers side.
the widening will have to go all the way back to where the seats mount on the floor.
its a lot of work and best done with the body off the chassis.
mitch
the widening will have to go all the way back to where the seats mount on the floor.
its a lot of work and best done with the body off the chassis.
mitch
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
Three speed is the same length as the manual. Four speed is about 2.5" longer or so.
When they went 4 speed the crossmembers (in fact the whole chassis changed as it mounts differently.
If I recall correctly, the auto and manual have different transfer levers to make up the difference without changing the console.
The 3 speed won't clear the sierra floor without widening either, and without a 2" BL, the sump is very close to the floor. I have done this before.
When they went 4 speed the crossmembers (in fact the whole chassis changed as it mounts differently.
If I recall correctly, the auto and manual have different transfer levers to make up the difference without changing the console.
The 3 speed won't clear the sierra floor without widening either, and without a 2" BL, the sump is very close to the floor. I have done this before.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests