Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Internal cage for RRC

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 2
Joined: Tue May 22, 2007 1:43 am
Location: Denmark, Europe

Internal cage for RRC

Post by Angus06 »

Hi
I am looking for pictures of internal cages in Range Rover Classics (2dr). Also any experiences with your different cage designs. I need it for inspiration before I start bending tube for my Challenge RRC.

Looking forward...

Angus06 :roll:
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Hi there try this months landrover monthly mag there is a pretty neat one in that that is if you can get that mag there it is a pommy mag.
If you cant get it i will try to scan some pics and post them up for you.
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Hi Angus,

Here is a couple of images from my 4 door classic

Cheers

Steve

Image

Image

Image
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 2
Joined: Tue May 22, 2007 1:43 am
Location: Denmark, Europe

Post by Angus06 »

Nice cage "UrbanRedneck" -Do you have any pictures of how the front legs go through the dash?

Steve -If you could scan what you have seen I would appreciate it -its 100km to the nearest LR-mag-outlet

Cheers,
Angus06
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Hi Angus,

My original idea was to route the front legs through the vents on the dash. The guy doing the cage explained that it would weaken the cage to much, as we would then need to bend the lower section of the leg out so it would allow access to the accelarator.

I'll check what images i have otherwise it will be next week before i can post anything.

Cheers

Steve
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

Finally pics of my cage, sorry about the delay :oops: but i have been interstate, this is where the front leg passes through the dash. We decided to keep it as close to the pillar as possible to keep the tube work as straight as possible

Image
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests