Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Check your spring mounts!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Check your spring mounts!

Post by ferrit »

Found this beauty the other day when i was getting some exhaust work done on the truck!

Image

LN106, 330,000kms, 1992 model.

Its the front drivers spring hanger, and the front weld on the hanger itself has fractured almost completely through! :shock:


Should be alright to just clean it up and MIG it, right?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Also seen them split fron the spring mount up to the top of chassis and even on unmodified stuff just clean it up well and if your a compenant welder you should be right 2mates and mine have cracked there but keep checking it
Image
plenty of parts on the bench
Top
Posts: 43
Joined: Mon Jul 31, 2006 7:44 pm
Location: in front of screen

Post by ShAgGS »

iv got an 82 model :armsup: and the same thing,same side,happend to mine as sik lux says clean him up, weld him up and keep an eye on it ;)
Top
Posts: 53
Joined: Mon Apr 19, 2004 1:44 pm
Location: Cockatoo

Post by Saratoga »

My 89 model did exactly the same thing, and yeah i just cleaned it up and welded it on both sides and is as good as new!
Thanks Russell
Top
Posts: 81
Joined: Sat Jun 03, 2006 8:59 pm
Location: newcastle

Post by dmcruising »

this must be one of toyotas common things i had to have mine done not long ago for the same reason and same side but i did find that the anchor pin on mine had rusted and swelled which stopped it from working so all the strain went onto the mount..
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

Generally that crack happens from lifting the springs and retaining that stupid torque rod setup. Same thing happened to mine and after i went to x-over it never appeared again.
\m/
Top
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

It is nothing new, I have welded up about 30+ customers front hangers while they are in getting work done. I normally do it for nothing.


brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Top
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

Mine whent up the side of the chassis rail and underneath. Cleaned up and fixed. Time will tell if it happens again. I have removed the torque rod thing because i have X over steer
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

Gribble wrote:Generally that crack happens from lifting the springs and retaining that stupid torque rod setup. Same thing happened to mine and after i went to x-over it never appeared again.
Mine has a crack in it i have to weld, how does cross over steering help it?

Cheers brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

The steering box isn't pushing foward and back on the mount and while your mounting up the new box you can also brace it a bit. Also removing the torque rod lets the spring take more of the force from bumps and so on
plenty of parts on the bench
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Yep thats the only crack my chassi has ever had, welded it up and have never had it aain as I went to cross over not long after that.

When going to cross over you remove the front trac/torque bar and this then frees everything in the front end up and releaves a bucket load of stress on lots of different mounts.

I've also seen the WHOLE trac bar mount get fully ripped out of the chassi leaving a big hole in the side of the rail.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Yeah seen one at work do that aswell it riped it off at the diff
plenty of parts on the bench
Top
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Having a tared down chassis for an LN65 thats been 'recently' sanded back and sprayed I'd have to say: Toyota doesn't have great qualiy control on their welds. Or at least didnt in 1984. Not just some small looking welds but the terrible splatter everywhere. Anyway the MIG took care of some stuff, now it looks too neet :D .
Wheeling on completely wicked angles, without even looking stable.
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

Guts wrote:I've also seen the WHOLE trac bar mount get fully ripped out of the chassi leaving a big hole in the side of the rail.
I did that to mine twice, half the motorvation for x-over came from that. Never had a drama since.
\m/
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

that happened to mine just cleaned it up and rewelded. well see how she pans out.
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 41 guests