Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel arch flares....80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4
Joined: Mon Apr 25, 2005 8:40 pm
Location: Port Hedland

Wheel arch flares....80 series

Post by masterliu »

How do you adjust the whell arch flares on an 80 series??
Posts: 106
Joined: Sun Jun 26, 2005 12:37 pm

Post by chook05 »

Front or rear ? std or after market? If std gxl to adjust front theres screws behind mud flaps and one near b/bar also remove park lights (1 screw on top under bonnet and pull forward) theres 10mm nuts also put hand in inerguard (under bonnet) near fire wall you will find another 10mm nut.
Rear on door, one nut top and bottm. 1/4, screws behind mud flaps remove inside trim panel and you will see more 10mm nuts. To easy
Posts: 4
Joined: Mon Apr 25, 2005 8:40 pm
Location: Port Hedland

Post by masterliu »

Should do the trick, thanks mate
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

thankyou that is good tech, it saved me a bit of head scratching!
Free air locker to the first 20 callers!
Posts: 677
Joined: Sun Feb 20, 2005 4:53 pm
Location: In them thar hills...

Post by Jeff80 »

Are you having a DIG DD?
" Some days you are the bug; some days you are the wind screen"
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Jeff80 wrote:Are you having a DIG DD?
no, I just know how search works and I'm thanking the author for the information; it was valuable to me, probably saved me a couple of hours.
Free air locker to the first 20 callers!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests