went into the usual lifts and whatevers to make it a bit Philippine trail worthy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1997 VITARA SAS
1997 VITARA SAS
october 2006
went into the usual lifts and whatevers to make it a bit Philippine trail worthy
went into the usual lifts and whatevers to make it a bit Philippine trail worthy
- crap
and decided it was already time for the inevitable SAS
and wento the minor tear down...
axles...
rear mitsubishi pajero 4.875:1, factory lsd
front mistubishi pajero 4.875:1 rear axle mated to danea 30 ends, factory lsd
a bit of cleaning
left factory lsd, right open
and on with the minor trimming...
mocking it up...
then goes te axles...
link materials
the new rear upper a arm
the joints
the rest
and a little touch of acrylic
the mounts and tabs...
and in....
and wento the minor tear down...
axles...
rear mitsubishi pajero 4.875:1, factory lsd
front mistubishi pajero 4.875:1 rear axle mated to danea 30 ends, factory lsd
a bit of cleaning
left factory lsd, right open
and on with the minor trimming...
mocking it up...
then goes te axles...
link materials
the new rear upper a arm
the joints
the rest
and a little touch of acrylic
the mounts and tabs...
and in....
4.875 diffs, 34" tires, stock tcase just wouldnt cut it. instead of buying el expensivo crawler gears i decided to to an el cheapo dual tcase fabbing...
after week of being lazy, i finally got it under the junk....
the crossmember and the additional tcase support
and got new slip yokes to fit...
april 21, 2007, finally got it out again to do some poser shots....
ran to the nearest muffler shop so i could hit the nearest hole before it gets dark...
...got the muffler done, and off to the hole...
and raced it the next day
and finished 16th out of the grid of 26, nor bad for a shakedown against huge land cruiser
after week of being lazy, i finally got it under the junk....
the crossmember and the additional tcase support
and got new slip yokes to fit...
april 21, 2007, finally got it out again to do some poser shots....
ran to the nearest muffler shop so i could hit the nearest hole before it gets dark...
...got the muffler done, and off to the hole...
and raced it the next day
and finished 16th out of the grid of 26, nor bad for a shakedown against huge land cruiser
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
super zook wrote:top work, i love your buggy on pirate aswell
+1
Its got a zook t-case in it, so technically its a zook. Post up some pics here.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 328
Joined: Sun Jun 27, 2004 10:35 pm
Joined: Sun Jun 27, 2004 10:35 pm
Location: Pimpin' zooks to disatisfied Jeep owners ;)
Contact:
Both builds are very impressive in both the fab work & detail as well as the rate of speed you're doing it all in. 
The tooling and precision for a 'back yard project' is admirable!
Definatley following both zook and buggy builds for some inspiration...
Wish I could fab/build even half as good as that
Mike
The tooling and precision for a 'back yard project' is admirable!
Definatley following both zook and buggy builds for some inspiration...
Wish I could fab/build even half as good as that
Mike
People to do, Things to see ;)
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
Upgrade to L.E.D. on your rig! http://www.ledautolamps.com/
ditched my patrol diff swap...used a daa 44 instead (4.875:1)
here are images of the slow progress...
it looks like im going to move the front diff a little bit forward to clear the oilpan and be able to create enough room to lower my rig 4 inches
it will be running on 38" inch swampers...still hoping to hit the trail by early september
thanks
here are images of the slow progress...
it looks like im going to move the front diff a little bit forward to clear the oilpan and be able to create enough room to lower my rig 4 inches
it will be running on 38" inch swampers...still hoping to hit the trail by early september
thanks
Read about this over on Pirate and ZK. Thanks for putting it up here too. One of the nicest full bodied zooks ever IMO. Well done on a great buildup dude and Im hanging to see how the buggy turns out too. 
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Who is online
Users browsing this forum: No registered users and 34 guests