Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

strengthing front diff housing

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

strengthing front diff housing

Post by MissDrew »

Sick of bending front diffs.
Hilux is getting 80 series diffs next year.
For now I have to put another hilux one in and don't want this one to bend.
Whats the best way to brace it?
Have what I am thinking of in red. Blank pic for other ideas.

Image

Image
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

Hey guts what way is the diff bending, up, or back?
MUD, MUD, GLORIOUS MUD!
Top
Posts: 59
Joined: Fri Apr 20, 2007 3:11 pm
Location: Australia

Contact:
Contact Jam-Pony

Re: strengthing front diff housing

Post by Jam-Pony »

Mine are braced similar to the way you have in your photo except with the main bracing on the bottom of the housing not the top. Mine also have some bracing off the short side of the pumpkin as well.

I would do a photo edit but i don't have Photoshop on this computer. Sorry.

Matt
Rangie, injected 4.6L, 35's, 8274, HID's, 6pt Cage, F & R Lockers...

What else turns you on? Drugs? Casual sex? Rough sex? Casual rough sex? I'm a docter, i need to know.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I don't want anything under the diff, I love having diff clearance ;)

They bend into a smiley face :D

I know most of the reason why they bend is because my suspension is setup for slow flexy driving and since the V8 I've sort of been doing fast driving :lol:
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

diff

Post by Webbie »

Dave laminate the bottom as well and only stitch weld it so it will still flex but not bend :idea: l thought you said you were too lazy hey :finger: ;)
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: diff

Post by MissDrew »

Webbie wrote:Dave laminate the bottom as well and only stitch weld it so it will still flex but not bend :idea: l thought you said you were too lazy hey :finger: ;)
Yeah I am but doing some welding to it while its a bare housing is easier then changing another one :roll:
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

If you don't want to go underneath, why not across the front as well. so,e nice flat bar and while your at a pumpkin protector.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

For the uneducated, what is bending them? Impact, power, suspension twist?

Thanx
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Well they don't bend while there is no weight on them :D
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Your pic looks like the go I reckon Guts.
That is what I have done to my front diff.
Also a good time to give it a shave and weld up the steering stops solid.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

ausyota wrote: Also a good time to give it a shave and weld up the steering stops solid.
Read Webbies post about being lazy :finger:
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Hay I got a bare Lux diff already done at work. Has been done for a while and is as your pic. :finger:
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

thats what i did to my GQ diff, except for my lux one, ill be doing a brace like siclux (who owns the tough tracks lux) did to his rear diff. goes on the front of the diff like a diff gaurd aswell, stop bending anyway that it wants too.
turbos are nice but i'd rather be blown
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Cheezy4x4 wrote:Hay I got a bare Lux diff already done at work. Has been done for a while and is as your pic. :finger:
LOL forgot about that one. Put it with all the buggy bits and ring me when I need to come for a drive with a trailer :armsup:
Top
Posts: 1144
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Contact:
Contact bushy555

Post by bushy555 »

Saw that superior engineering in brisbane are doing/selling strengthing kits for various diffs now. Ad was in Aus 4x4 monthly.
Emailed bloke for a GU diff, and replied $80.00 for one diff for bits to send and weld on. In my opinion that be cheaper than buggerising around finding decent scrap to cut and grind away making up bracketry. Although saying that, is gonna depend on if it is 1mm plate or something half decent like 4 or 5mm plate isn't it....


Just trying to check now for Hilux and 80 series, but site http://www.superiorengineering.com.au/ is down. Was up the other day.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Google [Bot] and 1 guest