Have had the dash out of my WJ for around four weeks , finally got the
thing back together
went to start it had a near flat battery but did start ,
once it warmed up a bit i brought the revs up to 2200 for a few minutes , which im told resets the managment , well it dosn,t run quite right
it has stalled a few times ,
should i have done somthing different as far as reconnecting the battery ect ?
Larry.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
efi stalling.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
no.... disconecting the battery on them only clears the codes, dosent affect how they run,and i havent ever hurd of running them at hi revs to rest the eng management(battery diconected already does this), I would be looking for some thing else, i would take it in to jeep and get them to chuck there computer (DRB3) on it to check and retreive codes from it, would also be checking the wiring around the dash, as u have just played with it you could have pinched a wire.... good luck
SKIPPY
SKIPPY
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D
www.roverpark.com
www.roverpark.com
Who is online
Users browsing this forum: No registered users and 3 guests