Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stock Sierra Video

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Stock Sierra Video

Post by greg »

Hi All,

Here's a little video that was captured on a recent pre-run with some members of the zook club.

A little bit of pre-viewing information:

This was my fourth attempts at this piece of track, i tried to crawl it in 1st low, then in 2nd low, then in 3rd low, and then in 4th low (as shown in the video). So i just wanted to point out that the little car doesn't normally get driven like this :oops:

Note: Just before the big "yeah" at the end you can hear the sneeze of the turbo if you listen hard :cool:

Note 2: It's 1.2 meg i think. :)

http://f2.grp.yahoofs.com/v1/ANWuP-VTjE ... 0_1080.avi

Cheers.

p.s. thanks Mock and Chris for your help with the video :cool:
DMA Founding Member #1 - Now Retired
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

yahoo is very slow today, even on my cable connection it took ages to start the vid. probly best to right clik link, and save target as, to your pooter, christover.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

achoo! yeah!
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

You are not authorized to view this page

cant get it to work?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 9
Joined: Sun Nov 09, 2003 9:12 pm
Location: Macedon Ranges

Post by Hard_top »

anyone else getting an unauthorized error when trying to d/l the vid? :?:
Checkout www.munroboards.com if you like offroad sports
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

redzook wrote:You are not authorized to view this page

cant get it to work?


Hmm, sorry guys, It works even when i have logged out of the yahoo group and try to access it.

Perhaps your 'puters are the problem?

Hey Chris, any ideas about this? I'm pretty sure these guys should be able to access it no worries right?
DMA Founding Member #1 - Now Retired
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

yahoo has pms today, it may get better later, if not, then we can email the vid? till our web master returns in his new wedded blissfull state. but if it works for us, when we logged out, it should work for non members. pretty sure any way.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Thanks Chris.

Sorry fellas, looks like you'll have to try again later :oops:
DMA Founding Member #1 - Now Retired
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

I been looking thru the group settings and it says members only can view files and photos, and there is no other options, other than moderators only. It will need to be hosted somewhere else for non members, or they need to sign up. I will look see if I can put it somewhere till graham gets back.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:Thanks Chris.

Sorry fellas, looks like you'll have to try again later :oops:


christover1 wrote:I been looking thru the group settings and it says members only can view files and photos, and there is no other options, other than moderators only. It will need to be hosted somewhere else for non members, or they need to sign up. I will look see if I can put it somewhere till graham gets back.


Pehaps Luis (WAVECULT) Could Host it, I believe he has hosted pics and vids b4.

Steve
yeshemesh
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

i'll host it for you tonight
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

N*A*M wrote:i'll host it for you tonight


Party at NAM's place tonight, BYO beer and portals ;)
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

N*A*M wrote:i'll host it for you tonight


Thanks NAM. ;)
DMA Founding Member #1 - Now Retired
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

hehe my volvo babies are in a secret offsite location anyhoo ;)
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

that worx thanx NAM :flasingsmile:
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

nice vid, the motor sure sounds different to what i had imagined
Posts: 78
Joined: Wed Nov 05, 2003 12:52 pm
Location: melbourne

Post by greyzook »

greg what motor is in it?
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

http://www.outerlimits4x4.com/PHP_Modul ... php?t=4009

Read here (Hey Greg I answered a question with a link)
yeshemesh
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Yes but you will never be ....................sir link-a-lot
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=4009

Read here (Hey Greg I answered a question with a link)


Nice work Grasshopper :D
DMA Founding Member #1 - Now Retired
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

antt wrote:nice vid, the motor sure sounds different to what i had imagined


What do you mean Antt? how did you expect it to sound?
DMA Founding Member #1 - Now Retired
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

greyzook wrote:greg what motor is in it?


It's an F6A out of a cappuccino - 660CC DOHC with a Turbo :cool:
DMA Founding Member #1 - Now Retired
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

werent u goin to put a motor bike muffler or somthin on it?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

redzook wrote:werent u goin to put a motor bike muffler or somthin on it?


We toyed with that idea, and also looked at putting a whiz bang ricer muffler on it, but these options were looking expensive - i.e. 600 bucks just for the muffler... so in the end we put a hotdog (made out of mild steel i think) on it and that seems to have worked pretty well (though it doesn't do much to keep it quiet)...

Don't forget that the whole exhaust system is two and a quarter inches straight through with a high flow cat... :cool:
DMA Founding Member #1 - Now Retired
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

i though it was goin to have a motor bike muffler on it thats why i was expecting somthin a lil different ;)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Yeah it definately doesn't have the 'mosquito' sound that i was fearful it was going to have... in fact it's probably almost as grunty sounding as a 1.3 (if that can be described as sounding 'grunty' :D )
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests