Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bimetal Vacuum switching valve

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 26
Joined: Thu Aug 09, 2007 2:11 am
Location: Lockyer Valley

Bimetal Vacuum switching valve

Post by Bundy79 »

Can anyone tell me what it does??
The one on my bundy with a 22r motor in it has gone tits up and the parts guy didnt know what it does. can i rig it back up or is it a definite replace job?
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

usually a valve that turns on or off at a set temp. probably for emissions, just bypass it ;)
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 26
Joined: Thu Aug 09, 2007 2:11 am
Location: Lockyer Valley

Post by Bundy79 »

Cheers thanks for that
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

check what it feeds. often its something like hot air intake.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

tweak'e wrote:check what it feeds. often its something like hot air intake.
Distributor Vacuum is usually routed through a temp valve so you don't get full advance until the engine is at operating temp.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 112 guests