82 f50 issues.

Post by **bigzuk** » Sat Sep 15, 2007 10:32 pm

Hey guys.

a mate of mine has a 82 f50 and has kinda destroyed his transfer case.

now we are after a cheap easy fix.

swap gearboxes?

change transfers?

rebuild transfer?

other options?

any help/advice is most appreciated.

or if anyone has any parts they'd donate/sell let me know.

cheers

john

Post by **Doc_Acos** » Wed Sep 19, 2007 9:31 pm

Was there any particular problem with it, like it just for some reason is stuck in neutral, etc

or did it experience a major catastrophic failure with big crunching noises, etc

Post by **bigzuk** » Thu Sep 20, 2007 8:53 pm

transfer case is missing a whole lot of teeth of a whole lot of gears.

a very unhappy piece of equipment

Post by **RockyF75** » Thu Sep 20, 2007 9:22 pm

They prolly look something like this then?

If it can help I've got a rocky box here I'd only want a few hungy for but I imagine freight to taz would kill

Post by **bigzuk** » Thu Sep 20, 2007 9:54 pm

yup that looks pretty similar.

ill talk to my mate bout that box.

things arent easy to find here for diahatsu's...nor are they cheap.

im guessing all the boxes are the same thru the rocky models?

Post by **RockyF75** » Thu Sep 20, 2007 10:01 pm

nup.

They changed a few things, someone here should know for sure but I think most if not all, as a complete unit, are interchangeable between year models. But gearing changed a fair bit, and the one's I have spare have vacuum operated 4x4, which might be a pita, whereas old school ones just have a lever.

Post by **Doc_Acos** » Thu Sep 20, 2007 11:05 pm

Yeah if they are like the pics from RockyF70, then definitely time to get them replaced

If it is damage to gear similar to the top two pics I would also suggest looking for a local gear maker or even contacting your nearest TAFE that teaches fitting and machining. Teachers at TAFE are generally willing to knock a gear or two up at a pretty decent price (Just make sure they will heat treat it correctly too).

But if it is like his bottom pic, with the two rows of teeth. They wouldn't have a gear shaper that could do it.

If all else fails you can always Try 'Gear Makers' in Kirrawee (Sydney), you would have to post the gears up to them but it may end up cheaper than a whole replacement box.

Good luck with it....

Post by **RockyF75** » Thu Sep 20, 2007 11:10 pm

you can get replacement gears from parts places. or even daihatsu. Thats where mine came from

Outer Limits 4x4 Board

82 f50 issues.

82 f50 issues.

Who is online