Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HJ60 Low oil pressure Please HELP

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

HJ60 Low oil pressure Please HELP

Post by Willy Hilux »

The old boy has gone up north on a fishing trip. He got to about Mackey and seen the oil pressure drop away to nearly no pressure at idle but comes back up to just under normal pressure at highway revs (2500rpm).
At the moment he is at our family fishing hut just north of Bowen. He is going to take it into Ayr on Wednesday morning to get a mechanic to look at it.
Any ideas from anyone that has had the same problem, feed back would be great as it might save alot of hassle and money.

Cheers.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

Possibility that its the oil pressure relief valve, they can and do jam open/closed. BIG hex headed plug on the front right of the block.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Is it a problem?? Does it need to be fixed straight away???
Is there anything he can do to fix it himself????
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Common problem, to fix you can fit a longer plunger in the relief valve. $12 - $30 depending on where you get it from.

Or you can get a bit of dowl about 12mm, a bit of wet&dry and linish the bore a little.

They wear a lip in the bore which causes the plunger (piston looking thing with a spring up its ass) to jam opened or closed.

The other option is to order another timing case off toyota ($1400) and fit that. Not very economical tho.

The toyota manual lists something like 4psi minimum oil pressure at idle hot and 85psi at 3000rpm.
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Where can we get a longer plunger from??
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Posts: 567
Joined: Fri Jul 20, 2007 7:37 am
Location: Panama

Post by Tapage »

FSM claims for at least 4PSI and 36 - 85 PSI @ 2000 rpm ( normal operative temp )

Common BEB's issue in 1HD-T and 1HZ engine when you have hi oil press at idle ( engine cold ) and suddenly it drops at virtualy 0 when the engine reach the normal operative temp ..

Anycase as you see recomended check first the pulnger seems to be more easy and cheap than any other ..

P.S. did you have a mechanical gauge for oil press .?
HJ-60 2H-T Intercoled [url=http://4x4panama.com/foros/viewtopic.php?t=2770]Tencha[/url]
HDJ-80 1HD-T Stock so far " Marilu "
Panama
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests