Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HIGH POWER UHF

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 32
Joined: Tue Nov 28, 2006 9:18 pm

HIGH POWER UHF

Post by davec »

guys bloke i know has a icom uhf from the usa,its 35watts or thereabouts,i know the local ones are 5 watts i think,is there any advantage to this or is it just a wank,i can get it at a good price,is it ok to use in oz and will it be better then a local unit?
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Re: HIGH POWER UHF

Post by -Scott- »

davec wrote:is it ok to use in oz
No.
davec wrote: and will it be better then a local unit?
I have NFI about the frequencies they use over there (I thought UHF CB was a uniquely Aussie thing) and it's possible this radio is a commercial unit for use with special license conditions on special frequencies.

Or I could be completely wrong. Can you find out the frequencies it uses?
Top
Posts: 320
Joined: Sun Feb 02, 2003 2:28 pm
Location: south australia

Post by crispy »

The maximum legal power on UHF CB is 5w, you can run these commercial units with higher power reprogrammed to uhf cb but is not legal.

is it worth it? well you'll have to get the programming software and cables and know how to program it, as most good radio places won't do it at high power. You'll also want a antenna thats in tip top shape as they need to be tuned properly at high power.
Also if you have a higher power unit than everyone else they will be able to hear you further away but they wont get back to you.
You could get it and run it at low power 5w if the specific radio was cheap but there still is the programming prob
The road to enlightenment requires Four Wheel Drive
Top
Posts: 32
Joined: Tue Nov 28, 2006 9:18 pm

Post by davec »

thanks guys i wont worry about it then.
cheers goldchaser
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

find out what the frequencies it operates on are. It may work and you'd have a great radio that can pump out a receivable distress call from heaps further than others.

You can stomp on cbwankers who have nothing better to do than talk shite on the channel you're using.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 326
Joined: Mon Aug 23, 2004 10:50 am
Location: Oran Park, NSW

Post by festy »

GQ Bear wrote: It may work and you'd have a great radio that can pump out a receivable distress call from heaps further than others.
Increasing from 5w to 35w won't get you much extra range at all, it's only about 1.3 s point increase.
Top
Posts: 32
Joined: Thu Nov 25, 2004 8:56 pm
Location: Geelong, Victoria

Post by Fox Shooter »

I have a Icom 400 pro and first of all the max they can go is 25 watts output. Mine is 25W output all that is required is the software and data cable to reprogram it, also you can program extra channels for trans / recieve. Technically to have a 25w UHF you need a comericial licence.
Top
Posts: 224
Joined: Sun Jul 23, 2006 4:47 pm
Location: Cornubia

Post by Sean »

i think i read somewhere that icom has a radio that runs at 45w over seas. they sell the same model over here but it is set to run at 5w.

cheers,
Sean
[quote="v840"]fat chicks actually [i]do[/i] give better head cause they're always hungry![/quote]
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 3 guests