Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A FRAME REARS

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

A FRAME REARS

Post by fatassgq »

I got told about a guy who runs one of these (wizard) and the guy said that the truck four wheel steers big time on the street just going round corners! :roll: That sounds insane. He also said that when they install one in a wagon they have to seriously mod shit so the tyres ( i presume 35"+) dont rip the shit out of the body.
Does anyone on this board run one? I was just curious as I know the likes of kim bolton and tim brady have them and it is obvious what they do for flex.
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

i think who ever told you has there info half right, yes the wizard kit rear steers bad, as for clearing 35's im not sure.


NICK
TECH SCREW GURU
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

it was actually tim brady's nav. I met him a while ago.
i guess there is always trade offs with getting flex!
Posts: 19
Joined: Wed Aug 13, 2003 8:05 pm
Location: Brisbane

a frames

Post by Mathew »

We just fitted a rear A frame to the ex sales reps patrol at work two weeks ago and it did make it very wandery on the road while driving.But as for guard damage with 35s no problem as yet he has been running 35s for the last year and a half and hasnt had a problem.When we did test the articulation on the hoist it did have plenty of clearance,but he would have trouble if running 37s :)
4WDs arent shopping trolleys
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

The links are too short, to fix the prob just make the links longer.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Cheezy4x4 wrote:The links are too short, to fix the prob just make the links longer.


yep, dead on. If you don't make the lowers longer the roll axis goes pointy especially badly in a nissan, because the lowers triasngulate outwards very slightly. you could have them the same length but running to the inside of the chassis rail and it would get rid of 90% of the steer.
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

isn't a good rule that the top arm should be 75% the length of the bottom arm, or the bottom arm 125% the length of the top arm.??

modman :roll:
Post Reply

Who is online

Users browsing this forum: No registered users and 120 guests