Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NT & WT Bullbars

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 36
Joined: Tue May 25, 2004 4:40 pm
Location: Melbourne

Contact:
Contact Ridealldayrideallnight

NT & WT Bullbars

Post by Ridealldayrideallnight »

Does anyone know if a NT ARB Bullbar will fit a WT Sierra? has anyone done this? what is involved in modifying the bar?
"G_ F_ck Y__rs_lf," Would you like to buy a vowel?
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Yes and nothing - It will bolt on.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

Gwagensteve wrote:Yes and nothing - It will bolt on.

Steve.
are you sure about that, where does the arb bull bar bolt onto? I havent seen one up close so I cant speek for ARB BARS.
BUT
I thought they bolted up next to the leaf spring shackle mount on the inside of the chassie on the WT and on the out side of the chassie and shackle mount on the NT.
I bought a NT bull bar by mistake and there is no way in hell it will bolt onto my WT :?
But mine is alloy so I am just going to copy the original mounts and make new ones out of 10mm alloy plate - then cut the original ones off but leave the main support inside the bull bar for extra strength.

Then bolt the new mounts to the car and then fit the bull bar to the new mounts while its on the car
(spot weld only first)- (then remove and tig weld properly)
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Posts: 16
Joined: Thu Aug 16, 2007 12:54 pm
Location: Benalla, Vic

Post by jhsuzi »

I agree, i had a custom bar made up for my WT. The bar was made off a NT chassis and would not fit on because of the leaf spring mounts. Simple angle grinder work and the bar is attached by three mounts on either chassis rail instead of four now.

Cheers :)
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Yes it fits.

I took my old arb off my NT and bolted onto my WT.

they use the chassis rails on the end. and also the end plates if u still have.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

ARB have only ever made 2x bars for all leaf Sierras (a winch mount and non-winch mount bar) and of which the non-winch mount bar has been deleted over time. Therefore ARB now only produces a winch bar for all leaf Sierras (P/No. 3424010). This will defintely bolt onto a standard 1.0 or 1.3 models (except SJ80-coilly), wide or narrow track.
http://stores.shop.ebay.com.au/4wd-products
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests