Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
doors locks 80series
Moderator: -Scott-
doors locks 80series
central locking dont work they make the noise but dont lock anyone help
Pull the door skin off the drivers side door (as this is the master lock, the others are just clones) and have a look at the actuator for the central locking. It clamps onto the rod (dont know actual name) which locks and unlocks the door via the nob. This is often the issue as it loosens over time and slips on the rod.
Just tighten (usually a small hex key or phillips head screw)and all should be fine and dandy.
Hope this helps.
Just tighten (usually a small hex key or phillips head screw)and all should be fine and dandy.
Hope this helps.
" Some days you are the bug; some days you are the wind screen"
Who is online
Users browsing this forum: No registered users and 1 guest