Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I just picked up a 2nd s[are for a Simpson trip but the tyre is on a Toyota 6 stud rim. The centre of the rim edging has little steps which I'm not sure about
What is the general rule of thumb about fitting Toyota ($ h i t ) rims on a GU.
I did some measurments and worst case I'll grind the knotches off if I need to use it. That is of course if it doesnt fit
Steve
Last edited by Swerve on Thu Oct 04, 2007 7:50 pm, edited 1 time in total.
no idea what cruiser it came off, but looks older style so maybe 60 series, and prob gxl?
the steps or notches in the rim would be for the wheel caps, goes over the axle where it bolts to the hub. the notches are for the metal clips to stop the covers coming off. this is how the 80 series ones work anyway
bj on roids wrote:i love how its crap cause its a toyota rim
just buy a gu one if you are that picky about your brand
Mate paid $150 for a brand new 33" BFG AT tyre and the rim.
It's my 6th wheel so all going well won't have to use. I like my Nissans and just having a dig a yotas.
Steve
PS leave tomorra for the Simpson
good luck mate, you might find it fits on the front and not the rear, in which case, if you get two rear flats, swap a front onto the rear and use it on your front...
Got two sets of 60 rims given to me. Suppose to be OEM and they don't have any notches on them - just lots of rust. One set will go for trailer rims and tires - cause they got decent 31" tread on them and the others will go for my winter tires.
