Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

transfer case temp

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

transfer case temp

Post by bazooked »

how warm is a zook transfer supposed to run? just got the 6.1 gears in and took it for a drive ,just seems a little on the warm side?
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

yeah mine runs quite warm as well :?
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

How hot is hot ?? does it burn your hand to touch hot ??

Mine gets warm (4.16 gears) but it's not to hot to handle hot after a long drive ( I have done oil changes on it after 100k or so drives as i thought there was a bit of water in the oil ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

i drove about 45 kms to the girlfriends house on sat nite and checked it when i got out, i couldnt keep my hand on it... :?
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

If that's the case you need a cooler... fitting it where it wont get ripped off is the issue.
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Sounds a bit to warm to me .. is it noisy ??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

dont no cant hear it over the mongrels, maybe they need to run in a bit?, i can say they arent as noisy as the 4.16.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

They will get warm.Quite hot actually.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

after driving all day in the searing 40* heat on saturday, my case was very warm as was my gearbox. damn even the tunnel was hot on my calf. :shock:
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

Suzuki Viagra wrote:If that's the case you need a cooler... fitting it where it wont get ripped off is the issue.


I'm courious please explan how you would go about fitting an oil cooler !?!

there's no pump ! and gravity feed wont work
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

oozuk wrote:
Suzuki Viagra wrote:If that's the case you need a cooler... fitting it where it wont get ripped off is the issue.


I'm courious please explan how you would go about fitting an oil cooler !?!

there's no pump ! and gravity feed wont work


Generally speaking there is enough movement from the gears to move oil around. Dunno zook specifics, but if there isn't then a heatsink could be attacheed directly to the case.
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Re: transfer case temp

Post by greg »

bazooked wrote:how warm is a zook transfer supposed to run? just got the 6.1 gears in and took it for a drive ,just seems a little on the warm side?


Hey bazooked, what "weight" oil are you running? Just wondering because i'm guessing that as it's heat is increasing, it would be giving less lubricating protection to the gears in the x-fer case right? (higher temps = reduced viscousity yes?)...

Apparently the g-o is to run something in the area of 140W with a rockhopper... If you are running less than this, it may be worthwhile getting some to protect those li'l gears.

Cheers.
DMA Founding Member #1 - Now Retired
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

im running the redline light weight shock proof gear oil, ran it before with the 4.16,never had a problem with it.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 5 guests