Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wobbles after tightning wheel bearings?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 138
Joined: Fri Jul 01, 2005 7:54 pm
Location: Albury

Wobbles after tightning wheel bearings?

Post by gqroo »

G'day all as the subject says i have the death wobbles after nipping up the front bearings, did not do before hand, swb 4'' lift. any one had this prob? suggestions, advice, abuse :roll: welcome
cheers Lou ;)
Gu 4.5 3''lift,35'',locka Blablabla.........Ohyea and its White!
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

jack it back up and check for slop in the wheels
start all over again
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 89
Joined: Mon Jun 05, 2006 9:26 am
Location: Sutherland Shire NSW

Post by GQSWB42td »

check your panhard bushes.
building
Top
Posts: 138
Joined: Fri Jul 01, 2005 7:54 pm
Location: Albury

Post by gqroo »

Ok cheers will do both ;)
Lou
Gu 4.5 3''lift,35'',locka Blablabla.........Ohyea and its White!
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

Its like a dodgy shopping trolley, panhard bushes and swivelhousing bearings.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 138
Joined: Fri Jul 01, 2005 7:54 pm
Location: Albury

Post by gqroo »

Well checked bearings and panard bushes all ok :? I will try swapping front wheels tomorrow if that dont work maybe time for new steer dampener??
Gu 4.5 3''lift,35'',locka Blablabla.........Ohyea and its White!
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

It will be slack swivel housings(not wheel bearing), rebuild and set the shims so the swivel housings are firm to turn with the steering arms disconnected, have fixed this on many occasions.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 138
Joined: Fri Jul 01, 2005 7:54 pm
Location: Albury

Post by gqroo »

Only did swiv house bearings 6months ago but i will take your advice Joel and check them again.
cheers Lou
Gu 4.5 3''lift,35'',locka Blablabla.........Ohyea and its White!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests