Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

maxi drive leaks

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 58
Joined: Wed Nov 08, 2006 6:00 pm
Location: mornington vic

maxi drive leaks

Post by mimmo321 »

had a new maxi drive locker instaled on my defender its always leaking without using locker leaks from bottom 2 bolts and if i tighten them then my diff is locked with switch off..

i dont understand it if any one has any idea please giv me some info
06 Defender 110. 3"ome Lift, 33" bfg muds, arb bar, 9500xp warn winch, tjm rails an steps, cibbie spotys, hf.....
Top
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

i cant help, but would say take it back to the installer and have it fixed.
ask there advice and if no help, ring maxi drive direct they will help you.
serg
Top
Posts: 98
Joined: Sat Jul 23, 2005 9:19 pm
Location: Canberra

Post by RRturboD »

I suspect there is something wrong with the installation. The mounting plate and locking mechanism body should be sealed by goop etc, should not matter how tight you do up the bolts as it is the body not the mechanism that you should be tightening etc. Did you get the instructions with it? PM me and I can email you a copy, at least then you will know how the gear is built.
Michael T
Aussie '88 RR Tdi300 Auto
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Drop in with a box of Melbourne stubbies ;)
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 58
Joined: Wed Nov 08, 2006 6:00 pm
Location: mornington vic

Post by mimmo321 »

were abouts u from ? not very happy with instalation should have been done properly, from day 1 it leaked
06 Defender 110. 3"ome Lift, 33" bfg muds, arb bar, 9500xp warn winch, tjm rails an steps, cibbie spotys, hf.....
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests