Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hj60 noise/ suspesion

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 38
Joined: Sun Oct 28, 2007 9:52 pm
Location: Whyalla, SA

hj60 noise/ suspesion

Post by harlequin »

hi this is an awesome site congrats to all.
i just boaght a 85 hj60 it has the usual leaks around swivel hubs, side plates bit round sump 300,000 klm but doesnt blow any smoke or use oil . gets 14l/100k round town and pulling 1t bmt on hwy not sure if thats good or bad, i have a buzzing whirring noise from hte harmonic balancer pully on the crank it is more pronounced when cold and low gears disappears comletely when hot and 4/5th any one know what this could be . also need to do suspension and seen ironman kit for 800 on ebay any one know if these kits are good or stay away from, all help is appreciated thank andy
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

The noise at cold is probably the powersteering pump, mine does the same and i've heard of others doing it too. Normally a pump gets noisy when the fluid is either aerated or the pump is stuffed. I'm not 100% sure why their noisy when cold but i thought maybe because the fluid is cold and thicker its not flowing aswell and getting slightly aerated? Just a thought.
Posts: 38
Joined: Sun Oct 28, 2007 9:52 pm
Location: Whyalla, SA

Post by harlequin »

thank for the reply chunks i just did the relief valve this morning had to move the power steering pump out of the way left the belt off as it is cracked when i started it with the pump not connected it still has a high pitch whirring sound and definately from around the big pully on the end of crank hope it is not main bearings or end float or whatever hope someone can give me some ideas as i dont wanna throw to much $ at it if its stuffed
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests