Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU 4.2 turbo 3" exhaust
GU 4.2 turbo 3" exhaust
Hi Guys
I am in the eastern suburbs of Melbourne and was wondering if anyone can recommend an exhaust place.
I am after a 3" mild steel exhaust and dump pipe for a GUII 4.2TD.
Does anyone pre make a bolt on system or will it have to be custom made?
Cheers
Eric
I am in the eastern suburbs of Melbourne and was wondering if anyone can recommend an exhaust place.
I am after a 3" mild steel exhaust and dump pipe for a GUII 4.2TD.
Does anyone pre make a bolt on system or will it have to be custom made?
Cheers
Eric
2000 GU II 4.2TD
Wats with all these high quotes?
I got a full 3" mild steel exhaust and also screamer pipe put in off my wastegate and chrome bling 3.5" tip and all new mounts and re angled dump pipe for $550 took then a bit over half a day. This was on the Tb42 though and also had a resiantor and straight thru muffler fitted but muffler got taken out and sold so was only $500 in the end haha
Rick.
I got a full 3" mild steel exhaust and also screamer pipe put in off my wastegate and chrome bling 3.5" tip and all new mounts and re angled dump pipe for $550 took then a bit over half a day. This was on the Tb42 though and also had a resiantor and straight thru muffler fitted but muffler got taken out and sold so was only $500 in the end haha
Rick.
I am looking at a tune after the exhaust.bogged wrote:cheaper than the quote I gotEricB wrote:thats cheap
just got a quote from Beaudesert
$1025 delivered to Melb
Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good
What power up did you get Bogged? They range from $400 to $17,000
2000 GU II 4.2TD
the old man has the stage 2 MTQ kit on his td42t with a 3 inch exhaust and an MTQ dump pipe, made a 108.7kw at the rears on 35s at 11psi. When you get the exhaust done, get them to weld in a nut for a pyro, when a good dyno tuner tunes it, they will check EGT's.EricB wrote:I am looking at a tune after the exhaust.bogged wrote:cheaper than the quote I gotEricB wrote:thats cheap
just got a quote from Beaudesert
$1025 delivered to Melb
Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good
What power up did you get Bogged? They range from $400 to $17,000
[color=red][size=150][b]CTRL + W[/b][/size][/color]
GQ4.8coilcab wrote:EricB wrote:I am looking at a tune after the exhaust.bogged wrote:cheaper than the quote I gotEricB wrote:thats cheap
just got a quote from Beaudesert
$1025 delivered to Melb
Lilydale Exhausts did mine when I had the powerup done by Dieseltec. its good
What power up did you get Bogged? They range from $400 to $17,000
the old man has the stage 2 MTQ kit on his td42t with a 3 inch exhaust and an MTQ dump pipe, made a 108.7kw at the rears on 35s at 11psi. When you get the exhaust done, get them to weld in a nut for a pyro, when a good dyno tuner tunes it, they will check EGT's.
Cool. Will the exhaust guy know what size nut and where to put it?
2000 GU II 4.2TD
I get them straight off the shelf at MTQ (DTS) I fit heaps of them, 3" straight through muffler, and dump pipe, I do an exhaust kit with dyno, adjust boost and fuel, usually nets about 30% increase with no increase in exhaust temps from standard in GU TD42.
Joel
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
It would be wise to take aboard that info. As you are finding out, there are exhausts and then there are exhausts.
Cheapest is to get the local exhaust guy to do it, we use Exhaust Fix in lilydale, knows his stuff, is very neat in finish. Then there are the kit 3" systems you fit yourself.
At the end of the day you pay for what you get, we have fitted beaudesert and taipan systems as well. It all boils down to the finish you want and how much you want to pay, and the advertising speal that they have.
Andy
Cheapest is to get the local exhaust guy to do it, we use Exhaust Fix in lilydale, knows his stuff, is very neat in finish. Then there are the kit 3" systems you fit yourself.
At the end of the day you pay for what you get, we have fitted beaudesert and taipan systems as well. It all boils down to the finish you want and how much you want to pay, and the advertising speal that they have.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
i have a beaudesert myself.
price is around what you were quoted (with muffler) but i also got a straight through section so i can swap.
beaudesert is fully flanged in factory locations, includes dump with point to put in a pyro.
Kit is great and it fits. no stuffing around, just bolt it in and away you go. will take a few hours (hardest part is the dump pipe) and means you only have the car off the road when it suits you.
Costs more but is proven.
Matt
price is around what you were quoted (with muffler) but i also got a straight through section so i can swap.
beaudesert is fully flanged in factory locations, includes dump with point to put in a pyro.
Kit is great and it fits. no stuffing around, just bolt it in and away you go. will take a few hours (hardest part is the dump pipe) and means you only have the car off the road when it suits you.
Costs more but is proven.
Matt
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
"EVILGU"
for me the exhaust itself had little to no effect.
but sounds good. however, when i removed and plugged the blow-off valve it made a noticeable difference (was able to pull 3rd low on a hill that 30 mins earlier i could just do 2nd low) i imagine the gain wouldn't be as good if i didn't have the pipe. however all this means sweet f-all without a dyno run.
doing this all in prep for some boost/tuning work. This is what will make the real difference and the pipe is just part of it.
Matt
but sounds good. however, when i removed and plugged the blow-off valve it made a noticeable difference (was able to pull 3rd low on a hill that 30 mins earlier i could just do 2nd low) i imagine the gain wouldn't be as good if i didn't have the pipe. however all this means sweet f-all without a dyno run.
doing this all in prep for some boost/tuning work. This is what will make the real difference and the pipe is just part of it.
Matt
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
"EVILGU"
bout that.. its pretty hideous when you think about the size of the motor with turbo. shows how under powered it rteally is :( .. one afternoon at Andys at Dieseltec and its a new car dude, you wouldnt regret it.EricB wrote:nice
So a few people have talked around 90 + rwkw after a 3" and a tune with a little more boost.
Does anyone know the rwkw on a totally stock 4.2TD might be?
Would it be like 75 rwkw?
Factory td42t patrols are putting out anywhere between 62 ish to 80 rwkw and anything in between.
Once you have a 3", with boost and fuel adjustments we set non i/c to around 85-90 rwkw and i/c to 90-95.
It transforms the vehicle.
Andy
Once you have a 3", with boost and fuel adjustments we set non i/c to around 85-90 rwkw and i/c to 90-95.
It transforms the vehicle.
Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
My figures agree with this 100%, anyone quoting over 100 rwkW is either on an innacurate dyno or running way too hot, as I'm sure Andy would know its quite possible to set these up without any increase in exhaust temp.Dzltec wrote:Factory td42t patrols are putting out anywhere between 62 ish to 80 rwkw and anything in between.
Once you have a 3", with boost and fuel adjustments we set non i/c to around 85-90 rwkw and i/c to 90-95.
It transforms the vehicle.
Andy
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Ive only had the car a few weeks and tonight I thought id open up the air cleaner box and check the filter and look around it before I order a snorkel.
It had one of the re-usable air filters that had not been cleaned for ages.
It had moths stuck to it and one side had that much dirt I dont know how the engine ran :(
I didnt have a cleaning kit so I washed it our with Turps (was the only thing that removed the oil and dirt) and then sprayed with a little WD40 until I buy a kit for it tomorrow.
I probably just gained 5kw LOL
It had one of the re-usable air filters that had not been cleaned for ages.
It had moths stuck to it and one side had that much dirt I dont know how the engine ran :(
I didnt have a cleaning kit so I washed it our with Turps (was the only thing that removed the oil and dirt) and then sprayed with a little WD40 until I buy a kit for it tomorrow.
I probably just gained 5kw LOL
2000 GU II 4.2TD
Who is online
Users browsing this forum: No registered users and 0 guests