Good day, all.
I have an MK diesel Triton, with a manual gearbox. While it was new, the clutch would engage when the pedal was only a short way off the floor but now after about 36000 km, the clutch doesn't start to engage until the pedal is a fair way off the floor. The dealer tells me their is no adjustment possible for taking up the slack as the clutch facings wear.
What reasons would there be not to thread the end of the pushrod at the clutch slave cylinder, put a nut and locking nut on it and then adjust the push rod to cause the clutch to take up when the clutch pedal is closer to the floor.
Sorry about the long-winded essay but this clutch pedal travel is annoying.
Thanks, Richard.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Mk manual Triton diesel clutch adjustment
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 4 guests