Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whine coming through speakers

For all things Electrical.

Moderator: -Scott-

Post Reply
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Whine coming through speakers

Post by Ben »

Hi lads,

I recently installed a Painless wiring aux fuse box.

It's all hooked up perfectly, but now I can hear a whine coming through the speakers (even with the radio off), matching the revs of the engine. Now I've returned the radio's power connections back to original (bypassing the new fuse panel) and it's still there.

Any tips? What should I be looking for??

Cheers,
Ben
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

my mates hyondai(or however its spelt) does the same with the rear speakers... he took it to a car radio place and they rekoned there was nuthin wrong with it as far as wiring etc goes, its just one of those things...


that doesnt help ya much, but yeah, i feel for ya, its a right PITA
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

whine

Post by KYSI »

hey mate check the wire...normally does this with car sterios when a wire is earthing out somewhere it shouldn't be check the wires for splits or anything is touching....i had the same problem in my vx when i did the sterio and a couple of my mates have had it happen to them.......good luck mate
Posts: 8
Joined: Mon Sep 18, 2006 5:33 pm
Location: Sydney

Post by moto maniac »

its definately an earthing problem! ive got it, my mates have had it, pretty common on audio/visual type systmes which have been done at home etc... a cble is touching something, earthing out at a connection etc.... check the full circut out closely - including speaker screws! (if they are metal speakers the earth can be where the speaker touches the screw touching the body! sneaky lil thing!

jimbo
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Could also be alternator noise
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

What I don't get is the fact I didn't touch the radio wiring!
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

may have run a power supply etc too close to the speaker's or similar.
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

Nah, that's the first thing I checked. The one thing I do know about is audio and power, but only $$ club/DJ systems, not car stuff. I'll just have to recheck everything and check the amp's ground and a few other things.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 34
Joined: Sun Oct 07, 2007 9:27 am
Location: north bris

Post by blacklion »

I had a weird 1 tday a customer came in with the same prob in an old chev the earth strap from the bonnet side of the hinge to the innerguard side had been broken, as soon as i fixd it the problem was gone, although this may not be directly associated with the fuse box. Just go around and have a look at all the earths and use a clip lead and try across the bonnet hinge... just a thought . :cool:
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

Double check with an multi meter that your earths are working properly, Sometimes with old audio bits or even cheap audio then dont have a niose supressor, and this can be excentuated by bad earths, yes you might have put a nice connection piece under a screw or bolt but that isnt always enough,
Try finding seperate earthing points for each bit, and as stated bearlier in this post, sometimes its not audio at all but sometimes a bad earth on the body.
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
eXc
Posts: 230
Joined: Tue Dec 12, 2006 9:01 am
Location: Newcastle, NSW

Post by eXc »

Check earths both on radio and your new thing... I would redo the earth on the radio.

You can also buy decvices that are supposed to stop the whigne...i cant think of the name of them though
User avatar
Eff
Posts: 146
Joined: Sat Jan 01, 2005 11:14 pm
Location: Melbourne

Post by Eff »

User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

Thanks fellas, I'll get my head under the bonnet and check all earths, it must be something I've done as I've never had the problem before.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests