Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1999 2.8 turbo nissin 2 inch lift questions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 71
Joined: Mon Jun 11, 2007 3:25 pm
Location: bittern

1999 2.8 turbo nissin 2 inch lift questions

Post by Thumper1 »

If i was to put a 2 ich lift kit in my patrol. would i pick up much body roll or would it still be the same as it was stock also how would it handle on the road. would there be any differnce in handling..

also how can i get more power from my patrol atm i have just installed a 2andhalf exsaust seems to pull alot harder any other ideas thanks daniel.
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

2" is a good size lift because no real modifications have to be done and if you get a stiff set of springs it will handle fine maybe better as your springs and shocks could be flogged out.
If you are thinking of using your truck off road more get the lift you want the first time because its an expensing exercise and personally 3" would be my minimum.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Posts: 71
Joined: Mon Jun 11, 2007 3:25 pm
Location: bittern

Post by Thumper1 »

yeh i wont be doing that much offroad but i also will be doing offroad at the same time the car drags a little underneath also i tow the boat around a bit aswel just looking for that little bit more height.
Posts: 82
Joined: Thu Jan 13, 2005 6:45 pm
Location: Brisbane

Post by red80 »

Do you need adjustable panhards for a 3" lift, and what about caster correction
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

red80 wrote:Do you need adjustable panhards for a 3" lift, and what about caster correction
depends who you talk to... I didnt.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests