Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Incab winch controller, which terminals?

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Incab winch controller, which terminals?

Post by M1S3RY »

When wiring an incab switch, which terminals on the control pack do you use for the in and out power?

Image

I have wired the switch only using 3 wires (I know) one for power, one for in and one for out.

I have searched, but was unable to find exactly what i wanted to know, i think i know which ones to use but not 100%. Thanks.
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Image
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

So basically i can connect my "in" wire to any terminal with a green wire and my "out" wire to any terminal with a black wire.

Thanks.
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

M1S3RY wrote:So basically i can connect my "in" wire to any terminal with a green wire and my "out" wire to any terminal with a black wire.

Thanks.
Thats right. However it still wont work as you have the 5 pin controller, so you need to switch the earth side of the solenoids too. You should use a DPDT switch. Mine only cost $15 for a decent rocker type.
Alternatively use a seperate on/off switch for the earths.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 89
Joined: Mon Jun 05, 2006 9:26 am
Location: Sutherland Shire NSW

Post by GQSWB42td »

do you use the same wiring diagram for the 5 pin controller
Thanks Dane
building
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

GQSWB42td wrote:do you use the same wiring diagram for the 5 pin controller
Thanks Dane
No, its different. Have a search cos here should be one somewhere on here.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

5 pin diagram:
Image

This was from memory, so i think it is correct:
Image
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 3 guests