Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cruise control & ABS with part time kit
Moderators: toaddog, Elmo, DUDELUX
Cruise control & ABS with part time kit
I have fitted a Marks part time kit to my Transfer case on my 97 4.5 80 series problem is that my cruise control wont work as the cruise is wired to the ABS on the computer. also is there a after market kit that would get my ABS going that any one knows of as I dont know how my insurance will go with out ABS
Re: Cruise control & ABS with part time kit
The ABS sensors are attached to the CV shafts, so as long as the CV's are stationary the ABS will not work.axle wrote:I have fitted a Marks part time kit to my Transfer case on my 97 4.5 80 series problem is that my cruise control wont work as the cruise is wired to the ABS on the computer. also is there a after market kit that would get my ABS going that any one knows of as I dont know how my insurance will go with out ABS
I'm suprised the cruise control works off the ABS, as non ABS vehicles still used the VSS to run the cruise control. Perhaps you can find where the cruise obtains it's signal from the ABS and transfer that connection to the VSS?
Greg G
2000 HDJ105
2000 HDJ105
Who is online
Users browsing this forum: No registered users and 106 guests