Eric, throw that filter away and use a paper element, much much more efficient and safer for you.
Andy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU 4.2 turbo 3" exhaust
I'm going to fit a 3" exhaust to my 4.2 TD (intercooled) and was going to go for one muffler. How loud are they with no mufflers, do they drone a bit on the freeway? or will it be too quite with one muffler, I still want to be able to hear it but don't want it to be annoying. I was getting a Beaudesert exhaust system
Ok Exhaust done today.
Good for the money but I had a few issues.
$570 and I was not really after a full mandril system but this guy said full mandril in mild steel for the price above. Nice
Drive the car home and a feel a little more power and im looking forward to the tune.
It has a little whistle now when changing gears
The note is a little deaper but I would say it is not louder then the stock system. This is with a straight through medium size mufler.
I jump under the car when I got home.
1st one or 2 bends are mandril and the last bend on the tail pipe is mandril.
I dont mind so much but I do mind when told ALL mandril (why bullsh*t)
Then while under the car. (not as much clearance as the old GQ, must do suspension next) I notice the brackets hanging down from the front swaybar and a bolt missing from each. Doh
Lucky I found some in the workshop.
I just have 1 question. Im not sure if he did all of the dump pipe or 3/4.
He told me where he started from. Im just not sure what is normally done.
He started at the flange facing down at the ground. Off the cast 90deg elbow.
Is this where they normally start or do they replace the elbow and bolt onto the turbo facing the firewall.
Would this 6" of casting make a lot of difference?
PS. I got a paper air filter on the way home.
I figure oil and dust make mud in the reuseable filters
Cheers
Eric
Good for the money but I had a few issues.
$570 and I was not really after a full mandril system but this guy said full mandril in mild steel for the price above. Nice
Drive the car home and a feel a little more power and im looking forward to the tune.
It has a little whistle now when changing gears
The note is a little deaper but I would say it is not louder then the stock system. This is with a straight through medium size mufler.
I jump under the car when I got home.
1st one or 2 bends are mandril and the last bend on the tail pipe is mandril.
I dont mind so much but I do mind when told ALL mandril (why bullsh*t)
Then while under the car. (not as much clearance as the old GQ, must do suspension next) I notice the brackets hanging down from the front swaybar and a bolt missing from each. Doh
Lucky I found some in the workshop.
I just have 1 question. Im not sure if he did all of the dump pipe or 3/4.
He told me where he started from. Im just not sure what is normally done.
He started at the flange facing down at the ground. Off the cast 90deg elbow.
Is this where they normally start or do they replace the elbow and bolt onto the turbo facing the firewall.
Would this 6" of casting make a lot of difference?
PS. I got a paper air filter on the way home.
I figure oil and dust make mud in the reuseable filters
Cheers
Eric
2000 GU II 4.2TD
As much gain comes from doing the cast dump pipe as there is doing the rest of the system, we always include the cast dump in our installations, the standard dump would be lucky to be 1 3/4 inches and is very restrictive.
You get what you pay for.
Joel
You get what you pay for.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
ok cool
So i need to find a 3" cast dump or have one made up.
http://www.eng-tek.com.au/product_info. ... cts_id=229
So i need to find a 3" cast dump or have one made up.
http://www.eng-tek.com.au/product_info. ... cts_id=229
2000 GU II 4.2TD
I tried to get a quote for just the dump pipe, and they said that they don't sell the system in pieces, just as a complete kit.bogged wrote:you can buy the dump on its own from Beaudesert.EricB wrote:ok cool
So i need to find a 3" cast dump or have one made up.
It looked to be one of the better designed dumps
http://www.scottsrods.com.au/
This guy has quoted me $150 + $15 shipping to Melb.
He sent a pic. Its a steel custom job.
And the other link a had earlier looks ok but double the price.
Problem is I cant contact that place.
http://www.eng-tek.com.au/product_info. ... cts_id=229
This guy has quoted me $150 + $15 shipping to Melb.
He sent a pic. Its a steel custom job.
And the other link a had earlier looks ok but double the price.
Problem is I cant contact that place.
http://www.eng-tek.com.au/product_info. ... cts_id=229
2000 GU II 4.2TD
GU TD42 wagon.
It started with 75rwkw with a bodgey fuel up only (not done by me)
After a beaudesert 3 inch system, re tune, minor boost up, earlier boost cut in - it got to 111rwkw.
Tune done by turbo engineeering in Thomastown vic.
Exhaust temps down, fuel usage down.
Completely different car to drive. So much more torque. Use 3rd gear thru corners where i was nearly back to 1st.
had it over 180kmph (private road).
Water temp doesnt move - even when towing long distances on really hot days.
Couldnt be happier.
It started with 75rwkw with a bodgey fuel up only (not done by me)
After a beaudesert 3 inch system, re tune, minor boost up, earlier boost cut in - it got to 111rwkw.
Tune done by turbo engineeering in Thomastown vic.
Exhaust temps down, fuel usage down.
Completely different car to drive. So much more torque. Use 3rd gear thru corners where i was nearly back to 1st.
had it over 180kmph (private road).
Water temp doesnt move - even when towing long distances on really hot days.
Couldnt be happier.
I got mine off them, just dump..Mudzuki wrote:I tried to get a quote for just the dump pipe, and they said that they don't sell the system in pieces, just as a complete kit.bogged wrote:you can buy the dump on its own from Beaudesert.EricB wrote:ok cool
So i need to find a 3" cast dump or have one made up.
It looked to be one of the better designed dumps
Who is online
Users browsing this forum: No registered users and 46 guests