Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo a 3L

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 71
Joined: Tue Mar 27, 2007 2:27 am
Location: brisbane

turbo a 3L

Post by dirty dirty 4x4 »

i have a 2lt and am about to buy a 3L and put the turbo from my surf on it, I have heard something about having to change water jackets or something can anyone shed some light on this or let me know about any other obsticals i may encounter
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Top
Posts: 38
Joined: Mon Sep 25, 2006 8:56 pm
Location: Toowoomba QLD

Post by 93lux »

What I did with the coolant was put a 2lt-e heater pipes and thermostat housing on. They both have the provisions for hoses to go to the turbo.
Top
Posts: 43
Joined: Mon Jul 31, 2006 7:44 pm
Location: in front of screen

Post by ShAgGS »

the oil dump will have to go into the sump, the 3L block is different, as in no hole for the oil dump, but everything else is pretty much the same and dont forget to wind the pump up a little.
lux, few mods, many more to go.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

With the oil dump my mates Dts kits drop back in through a spot in the block sloshy may be able to post up a pic or if i see my mates other one round i'll get a pic.
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests