Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sialsbury 4.11 please

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

sialsbury 4.11 please

Post by defmec »

i just got some 35s for my 2oo tdi defender and no one i call has 4.11 ring and pinions for a sialsbury can someone help
Top
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

Post by defmec »

will a 4.7.1 from a series 3 fit a 110 salisbury
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

4.7 from a series will fit but you need the complete centre (flange is in a different spot). Will probably be too low a ratio for you.

Otherwise you can get a 4.11 R&P Dana 60 ring and pinion, but you need to buy a few special bearings and make a custom propshaft flange.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

Thats it Dana 60 stuff but the prop needs an open style uni joint on it


Ive got it fitted to my 110 and it was previously on my disco
Top
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

Post by defmec »

i can get a dana 60 r&p new for 200 bucks where can i get the prop made and is that all i need apparently gbr in the us make a straight fit 4.11 does anyone know much about them
Top
Posts: 512
Joined: Sun Jul 01, 2007 6:04 pm
Location: cairns

Post by defmec »

great basin rovers make a 4.1 for the 3.5 Salisbury and its only $550 aud but also kam diffs make a 3.8 they claim to be 70% stronger then standard for $700 aud what would be the better choice?
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Best bet would be to contact Keith at rovertracks (posts on here sometimes as Revor). He can give you all the advice you need and should be able to sell you the bits you need for a good price.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

defmec wrote:great basin rovers make a 4.1 for the 3.5 Salisbury and its only $550 aud but also kam diffs make a 3.8 they claim to be 70% stronger then standard for $700 aud what would be the better choice?
I havent contacted GBR yet but I think their 110 sets are Dana60, the part code has D60 in it, there is a note to contact for further info. Dana 60 gears are easy to get from the states, summitracing.com have them from $185US.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 35 guests