Hey guys/girls, I did a search and checked the bible but nobody really touched on what I need to know. It's just a quick question before I go and tackle it.
Where does the gearbox get filled up from and how much oil do I put in it? I've never changed the oil in a gearbox before and just wanna quick description before I do it.
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Changing Sierra gearbox oil
Place zook onto level ground.
Drain the oil using lower bung, once its drained fit bung.
Then remove the bung on the back of the gearbox about halfway up, this is the filler bung, it should be the same size as the drain bung.
Then just fill with oil until it starts overflowing out the bung hole, then its full. Replace bung and drive.
Drain the oil using lower bung, once its drained fit bung.
Then remove the bung on the back of the gearbox about halfway up, this is the filler bung, it should be the same size as the drain bung.
Then just fill with oil until it starts overflowing out the bung hole, then its full. Replace bung and drive.
I suggest removing the filler plug before removing the drain plug, just incase you cant get the filler plug off leaving you with no way to fill it back up again. Dont ask how i know this 

98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Who is online
Users browsing this forum: No registered users and 4 guests