My SD33T is in need of a nice new zorst system shortly.....
What zorsts have u guys put on your SD33T for a nice note?
i really love the TD whistle and want it nicely heard within noise regs...
Do the turbos keep it quiet enough to not run a muffler?
Screwy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
exaust for your TD
exaust for your TD
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
A mate of mine has a 4.2TD with a 3 inch exhaust with no muffler and it produces a sweet note with the tubo through the gear changes.
a way to do it is to get a plate welded just after the dump pipe and keep the old exhaust with the muffler and get an identical plate welded on that end as well. Then if you get pulled over for some reason and it gets pulled, its a simple case of replacing the two, getting it inspected, then changing back to the muffler free pipe
a way to do it is to get a plate welded just after the dump pipe and keep the old exhaust with the muffler and get an identical plate welded on that end as well. Then if you get pulled over for some reason and it gets pulled, its a simple case of replacing the two, getting it inspected, then changing back to the muffler free pipe
i ran patroldudes 3 inch and was sweet. No i have a 2and a bit inch and was wisper quiet and was not much power. I cut it in half and now goes good again but a bit noisy/
IF you want it and join it back up it can be arranged as soon as i mod the 3 inch again to clear another fuel tank.
Ask anyone who has heard my swb with the 3inch or this one with half an exhaust will say it sounds like a kenny
but its 
on a long drive
IF you want it and join it back up it can be arranged as soon as i mod the 3 inch again to clear another fuel tank.
Ask anyone who has heard my swb with the 3inch or this one with half an exhaust will say it sounds like a kenny
but its on a long drive
MINEaidannorris wrote:A mate of mine has a 4.2TD with a 3 inch exhaust with no muffler and it produces a sweet note with the tubo through the gear changes.
a way to do it is to get a plate welded just after the dump pipe and keep the old exhaust with the muffler and get an identical plate welded on that end as well. Then if you get pulled over for some reason and it gets pulled, its a simple case of replacing the two, getting it inspected, then changing back to the muffler free pipe
but i've got a 1.5m ish muffler section ready to bolt in/out rather than the whole thing.GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Short
Screwy
My pipe on the old rig, Its short but loud can hear the whistle before anything else. Its still got the std dump then 2&half pipe straight. It only ended up like this after the L28 came out and the diesel went in.
Have no real reason y its like this 
Its tucked up near the LHS chassie rail just in front of the LHR tyre
Although not legal on out the passender side. Building up a shute will just have two 4" stacks.. Go the 3" straight through but
Sterlo
My pipe on the old rig, Its short but loud can hear the whistle before anything else. Its still got the std dump then 2&half pipe straight. It only ended up like this after the L28 came out and the diesel went in.
Have no real reason y its like this Its tucked up near the LHS chassie rail just in front of the LHR tyreAlthough not legal on out the passender side. Building up a shute will just have two 4" stacks.. Go the 3" straight through but
Sterlo
Who is online
Users browsing this forum: No registered users and 1 guest