Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Compressor Mount
Moderators: toaddog, Elmo, DUDELUX
Compressor Mount
Where are people mounting air compressors in the vehicle. I just got an ARB unit and don't really want it under the bonnet. Any idea's, pics would be great!
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
hey mate, i had the same problem i have a dual cab lux, you have the room to mount it under the passenger seat dont you. is it used for air lockers. if not then under the seat is good. otherwise you look like you have a 60 series. put it in the back quarter panel in the boot i think they have covers over them the ones where the jack and shiz sits that comes off i think. that might help with some ideas.
cya mate.
cya mate.
netime mate, fill us in on how you go, the rear quarter panel is good coz it is accessible and yet still in a safe water and dust free area. make sure you mount it with the rubber boots tho or it will rattle like all hell. dont cover it up full either as they get bloody hot. make sure it has some sort of vented piece covering the hole.
cya mate.
cya mate.
comp
hey joel,
iv got a 60, and i run a compressor under each of the front seats, they mount under there quiet nicly, a little noisey, but i also run an air tank (for the lockers), so once that is filled, the compressors dont come on again, untill, im pumping up my tires.
justa thought
iv got a 60, and i run a compressor under each of the front seats, they mount under there quiet nicly, a little noisey, but i also run an air tank (for the lockers), so once that is filled, the compressors dont come on again, untill, im pumping up my tires.
justa thought
Zooks are for people that aren't afraid of angles and who have nothing to compensate for
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Wellll forgot about this one.
Two problems I have found with it here.
1/ Pulling the cover on and off has rooted the cardboard(?) where the black clips slide into.
2/ Over time the bottom of the support has rattled free. I'll re weld that sucker.
Joel
Two problems I have found with it here.
1/ Pulling the cover on and off has rooted the cardboard(?) where the black clips slide into.
2/ Over time the bottom of the support has rattled free. I'll re weld that sucker.
Joel
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
G'day joel
Did the supplied loom reach that far back into the quarter panel? I was thinking of doing something similar. To avoid wear and tear to the "cardboard" I was thinking of either replacing it with some aluminium checker plate or sourcing another "rear wiper washer fill lid thingy" (got no idea what it's called
). Anyway the thought was to bracket up the air connection nozzle here. When needed, take off the cover, plug the air hose on and you're in business (sounds good in theory anyway). what are your thoughts?
Cheers
Did the supplied loom reach that far back into the quarter panel? I was thinking of doing something similar. To avoid wear and tear to the "cardboard" I was thinking of either replacing it with some aluminium checker plate or sourcing another "rear wiper washer fill lid thingy" (got no idea what it's called
). Anyway the thought was to bracket up the air connection nozzle here. When needed, take off the cover, plug the air hose on and you're in business (sounds good in theory anyway). what are your thoughts?Cheers
Loom made it nearly all the way. Just had to extend the pressure switch lines and the power line but it wasn't by much!
The bracket is an excellent idea. I had planned on placing say 6" of 1/2" hose behind the female coupler and have it coupled to the tee piece so I didn't have to fiddle around in there as much. Would make it easier and way quicker to hook my airline up too.
The bracket is an excellent idea. I had planned on placing say 6" of 1/2" hose behind the female coupler and have it coupled to the tee piece so I didn't have to fiddle around in there as much. Would make it easier and way quicker to hook my airline up too.
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Who is online
Users browsing this forum: No registered users and 151 guests