Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Indicators wont reset after new steering wheel fitted.

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 184
Joined: Tue May 27, 2003 7:33 pm
Location: Endeavour Hills, Melb, Aust

Indicators wont reset after new steering wheel fitted.

Post by Red_MAv »

This isnt technically a 4x4 question but someone will know I hope. My son has whacked a flash new steering wheel on his subaru impreza. He used a boss kit but now the indicators dont reset once you turn a corner. What as he left off. He still has the orginal wheel and I notice the little lead that works the horn is still attached to that so thats going to be why he has no friggin horn either. Kids...
Top
Posts: 544
Joined: Sat Jan 10, 2004 5:49 pm
Location: Kalorama, VIC

Post by M1S3RY »

On the boss there should be a little knob that sticks out on the back. This needs to be either at the top or the bottom depending on the car. It's the bit the cancels the indicators. Chances are he's just wacked it on and not seen it. And yes you'll probably need the little wire for the horn.
Four wheels (Driving) good, two wheels bad.

NP Pajero with added goodness..
Top
Posts: 184
Joined: Tue May 27, 2003 7:33 pm
Location: Endeavour Hills, Melb, Aust

Post by Red_MAv »

OK, thanks will pull the wheel off and check it out this weekend..
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests