Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series Bump stops

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

100 series Bump stops

Post by Harrow »

Hey People just put 315/75R16 M/T MTZs on my car and in the rear it flexes so much the tyre rubs and binds up in my gards. i was wondering if there was a way of extending my bump stops so there is not as much up travel. Any one got any ideas on how to do this? thought i would ask before i look my self encase anyone has an easy answer.

Thanks
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

yes there is...75 series front bump stops fit or simply space yours down an inch...
Top
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Post by Harrow »

cool!!! how much longer are the 75 series front bump stops?
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Post by Harrow »

???????????????????????
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

They are about 4 inches long, you can keep the 80 ones and put 50mm rhs under them to get thesame spacing, just drill and use 3 inch bolts
Top
Posts: 15
Joined: Sun Sep 25, 2005 10:42 pm
Location: Wollongong, Australia.

Post by Phil M »

Here's mine.

I just flexed it up, took some measurements at full compression and made them a bit longer.

Image

Image

Cheers Phil.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest