Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

series 1 disco uni Q

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

series 1 disco uni Q

Post by matsmad »

If i wanna get rid of the rubber coupling (1995 300TDI) on the rear driveshaft can i bolt a driveshaft up from an early series 1 (200TDI, solid uni) or do i have to change the flange/diff centre?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 500
Joined: Tue Nov 04, 2003 2:00 am
Location: Canada

Post by red90 »

You beed to change the diff pinion flange at the same time. Simple job.
[color=red]1991 Landrover 90 ex-MOD[/color]
Top
Posts: 47
Joined: Mon Mar 28, 2005 5:38 pm
Location: shiteney

Post by DARTHrover »

you also need the spacer thats behind the pinion flange.
might as well throw a new seal in it while your there.
Challenge excepted!
Top
Posts: 36
Joined: Sat Jul 14, 2007 7:37 pm
Location: Newcastle

Post by 1tuff_disco »

Yeah you will need a new flange, spacer collar and 4 x bolts try http://www.discoweb.org/rotoconversion/index.htm
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Does anyone have the thickness of that spacer?
I've got 24 spline bits to replace my old 10spline. I presume the 10spline diff drive flange will fit the 24sp diff (with the spacer)?
Top
Posts: 36
Joined: Wed Apr 13, 2005 9:00 pm
Location: Melbourne

Post by lariens »

A friend of mine is selling his 98 D1 and I want to get rid of the rubber donut too. Can I just swap the tail shalft and the diff pinion adaptor from the friends car or will I need to change the diffs too?
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

Post by matsmad »

Very interesting. I priced up a rotoflex coupling from the Uk delivered about $135 and in aus $160 :shock: How much does the conversion cost all up? Where do i get a 4 bolt flange and driveshaft?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests