Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.8 INTO A SWB GQ
4.8 INTO A SWB GQ
Hey guys as above im thinking about tryin to squeeze a 4.8 into a shorty. My questions are. Has anyone dont it, will it fit and Whats it going to cost. I know that people have put 4.8s in gq's so i assume they fit but what needs changing. Ie engine mounts i assume the box will bolt up. Also how hard is all the wiring going to be and can you suggest anyone. and finally were to source a complete 4.8 with computer and loom
any help would be great
Thanks guys
any help would be great
Thanks guys
andrewholmes
Re: 4.8 INTO A SWB GQ
hey mate...mudmav wrote:Hey guys as above im thinking about tryin to squeeze a 4.8 into a shorty. My questions are. Has anyone dont it, will it fit and Whats it going to cost. I know that people have put 4.8s in gq's so i assume they fit but what needs changing. Ie engine mounts i assume the box will bolt up. Also how hard is all the wiring going to be and can you suggest anyone. and finally were to source a complete 4.8 with computer and loom
any help would be great
Thanks guys
Its been done, Pete GQHOON has one in his green shorty at ateco this year was naturally aspirated and now has been turboed.
Engine mounts will need to be changed you can use your manual gearbox.
Petes conversion was done at Ontrack in east keilor, however he purchased the motor from sandy at Hall 4x4.
In terms of getting it fitted you would probably best to speak with Ontrack as they have done 2 already i believe birdy is getting one also. Or you can see Joel at PGS as he intially tuned it when it was naturally aspirated and would also be able to fit the motor and have it tuned for you both companies are situated on either side of melbourne.
Hope the info was helpful
James
For all your HID and LED stuff
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
http://offroadindustries.com.au/
Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Chris at KJ's off road centre has done this conversion. Pretty straight forward really. They come up at around 120kw at the wheels in standard guise.
Give him a call. 5222 8665.
Give him a call. 5222 8665.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=120058
have a look here!
I believe the motor came from Fester out Minden way (West of Brisbane)
actually! On thinking some more
The chassis might be a shortened LWB
cheers
have a look here!
I believe the motor came from Fester out Minden way (West of Brisbane)
actually! On thinking some more

The chassis might be a shortened LWB

cheers
JB
Who is online
Users browsing this forum: No registered users and 5 guests