Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Locker to LSD help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 85
Joined: Thu Jan 22, 2004 6:19 pm
Location: eastern melbourne

Locker to LSD help

Post by TwistedMQ »

Gday guys I have a GQ with broken vaccuum diff lock, and was thinking of replacing it with an LSD. I have been told that one of the axles is shorter with the diff lock can I still use it with the LSD or do I need to get a longer axle?
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

it will fit and should be fine just a little less surface contace on the splines but on a lsd i cant see this being a major issue

could be wrong tho.
dont forget you have to weld up the hole in the diff. you will probable
(depending on wich bits broken) and if you shop around you will get a whole lsd diff for 300-350

id just buy the whole diff n swap it in
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

!!!!!


fix the diff lock bro!
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 300
Joined: Mon Apr 24, 2006 11:00 pm
Location: Bayswater, Vic

Post by dansedgli »

Who would be able to fix the factory locker?

Mine is playing up again and I need new gears as well. They are too noisy.
SWB mav. Some mods.
Posts: 49
Joined: Wed Oct 25, 2006 10:57 pm
Location: Melbourne, east suburbs

rear diff

Post by workmonday »

Hi, I got a rear diff complete, lsd works, 4.1 ratio, coil rear, compklete, $250 if ya want it, seville, vic, 0415165577
Posts: 90
Joined: Tue Aug 16, 2005 2:53 pm
Location: Wellington NZ

Post by doddzee »

Ive just broken my rear locker too and are chucking a lsd into it to get it back onto the road but are having trouble getting the driver side axle to go all the way back in. Its like it needs 10mm cut off the end.

Can anyone tell me what the length of the standard length axle is??

Are you guys sure the diff lock axle is the shorter of the two??

Im happy to cut the axle to length but want to make sure it is the axle that is preventing it from going all the way in.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests