Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1UZ Sump

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 79
Joined: Thu Mar 16, 2006 9:53 am
Location: Wodonga

1UZ Sump

Post by Grublux »

I have purchased the rear bowl sump from castlemaine rod shop for my 1UZ conversion into a hilux and I am looking for some photos or ideas on what people might have done 'baffle wise' to stop all the oil flowing away from the pick-up when on a down-hill slope.
Thanks
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I haven't done anything, when going down STEEP hill my oil pressour goes real low, as soon as you give some gas its back again.

Did you workout your dip stick mate?
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

How much was the sump?

pics?


Whats up with the dipstick?

I ran the dipstick off a different breed of motor and it seems fine...
hands and mums dont count!!!
Top
Posts: 191
Joined: Mon Nov 29, 2004 5:42 pm
Location: melbourne

Post by kranked_dirt »

What needs to be done to the dipstick? I just put a rear sump on mine and used the dipstick that came with it... is there something wrong with this?
went there dressed up, came back messed up

81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

kranked_dirt wrote:What needs to be done to the dipstick? I just put a rear sump on mine and used the dipstick that came with it... is there something wrong with this?
maybe he had an aftermarket exhaust or other clearance issues....
hands and mums dont count!!!
Top
Posts: 191
Joined: Mon Nov 29, 2004 5:42 pm
Location: melbourne

Post by kranked_dirt »

ah okay fair enough, i didn't think of that :?
went there dressed up, came back messed up

81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Top
Posts: 79
Joined: Thu Mar 16, 2006 9:53 am
Location: Wodonga

1UZ

Post by Grublux »

The Castlemaine Rod Shop Sump is about $700 from memory and they modify your pick-up for you.

The sump
Image

Image

The modified pick-up
Image

I had an external tube for the dipstick going into my original sump (1UZ from a Celsior) so the tube needed to be cut to the right length so as the dip stick would sit at the right depth when put through the hole in the block at the back

Cut dipstick tube
Image

And the dipstick sitting in it's final resting place
Image
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 101 guests