Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Aluminium MIG/ TIG welder in brisbane??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Aluminium MIG/ TIG welder in brisbane??

Post by Gutless »

Any of you blokes/ ladies setup for alloy welding? I have a MIG and can weld alloy, but don't fancy getting a tank of Argon just for 3" of weld.

I'm happy to pay in cash or brew. Prefer south or west of brisbane, but can travel to north if need be.

Cheers
Peter
0404 057 383
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

weld

Post by micks troll »

Cant remember the company name but Trevor on 4/35 Randall St Slacks Creek does aluminium welding. Next to Ross Fabrication. Great blokes
George or Clive Ross may even do it too, their number is 32902433
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

Thanks. Turns out I need someone with a Pulse MIG, as there is a delicate brass bush inside one of the pieces that needs welding and iut cannot be removed. So a normal alloy weld will kill the bush :bad-words:
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

Post by micks troll »

Gutless wrote:Thanks. Turns out I need someone with a Pulse MIG, as there is a delicate brass bush inside one of the pieces that needs welding and iut cannot be removed. So a normal alloy weld will kill the bush :bad-words:
Bugger they dont have pulse. We have pulse migs where i work but dont do alloy :cry: good luck surely some one here does that or try a hotrod place.
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

Post by rover1 »

what is it that you need welded?
cheers Pete.

its the skinny pedal
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest