Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clunking in 4wd

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
User avatar
WTF
Posts: 181
Joined: Sat Apr 02, 2005 10:54 am
Location: Bris/Melb

Clunking in 4wd

Post by WTF »

heyas,

im wondering if anyone else has experienced the following:

when in 4wd mode, as soon as there is any resistance applied to the front wheels i CLUNK, CLUNK, CLUNK sound occurs from somewhere at the front/under the car.

So far i have replaceda lot of items trying to find the cause of the problem, but since its impossible to replicate on the hoist, i have thus far been unable to track it down.

the front diff is fine, the front axles and splits are fine, we replaced the bearings on the front axles, the engine mounts we just replaced, the gearbox mounts are fine, there was only a small amount of metal traces in the transfer case, and now we have just pulled the transfer case off.

just looking at the transfer case it appears the chain that drives teh front wheels isnt particularly tight, is this a common fault? has anyone else had the same issue and can verify a loose chain could be the cause of the problem?

Priced up a replacement from mitsubishi, they are $660 for the chain, which is a bit steep for something that yet again 'might' fix the problem. I feel im chasing my tail and replacing so much stuff on the car, costing a fortune but not locating the problem :(

any help appreciated,

thanks

mark
-current rides-
93 JTOP Pajero, 33s, Twin Lockers, V6 3.0
97 Supra Turbo, 650hp 3.0 turbo
89 Nissan 180sx 6spd 300hp race car
89 Soarer Convertible Turbo
User avatar
WTF
Posts: 181
Joined: Sat Apr 02, 2005 10:54 am
Location: Bris/Melb

Post by WTF »

or anyone curious, my workshop just changed the transfer case to another unit, it appears to have solved the problem.

There was no signs of fatigue in the old transfer case and the chain didnt look visibly stretched, however there was a little scuff on the outer casing of the xfer, so im guessing it must have been a stretched chain afterall.

now i have a spare xfer case, im considering putting drop gears in it, but still not sure whether to spend more money on the paj or buy a 100 series.. hmm :S

mark
-current rides-
93 JTOP Pajero, 33s, Twin Lockers, V6 3.0
97 Supra Turbo, 650hp 3.0 turbo
89 Nissan 180sx 6spd 300hp race car
89 Soarer Convertible Turbo
User avatar
jop
Posts: 257
Joined: Wed Mar 21, 2007 5:29 pm
Location: brisbane

Post by jop »

spend more money on the paj :armsup:

you are my r&d department.

BTW i am still waiting for my sliders........
i'll let you know when i get them
Posts: 77
Joined: Wed Aug 22, 2007 12:47 am
Location: melbournes west

Post by xagtho »

I bought a 2 yr old 4x4 triton once which had a streched transfer case chain, mitsubishi changed both the chain and the gears under warranty, previous public servant owners must have driven for a fair bit on the bitchy in 4wd for this to happen.
Last edited by xagtho on Mon Feb 04, 2008 7:21 pm, edited 1 time in total.
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

sounds like a stretched chain. I did one a year or so ago, found one from a wreckers for $450 but cost me more to put in in.
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests