Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Inverter question

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Inverter question

Post by bj42turbo »

This is proberly a stupid question, bit I have just installed a 150w interverter in my work van. Now my question is if I wire it direct to the battery (it has a cig lighter plug at the moment) will it draw any power from the battery when it is switched off at the 240v end. should I at the 12v end fit a relay with a switch.


Cheers BJ
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

relay and switch..


what do you expect to run with 150W :?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

j-top paj wrote:relay and switch..


what do you expect to run with 150W :?
just a small 20w printer,

BJ
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

OH and thanks j-top paj Relay and switch it is


BJ
Posts: 558
Joined: Sat Dec 11, 2004 4:38 pm
Location: Gold Coast

Post by drivesafe »

Hi BJ, not knowing what brand you have, but if the switch is on the 12 volt input then once the switch is turned off, there should be no power draw at all and you shouldn't need anything else.

Cheers
2007 TDV8 Range Rover Lux
2009 2.7 Discovery 4
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

Thanks mate, I ended up using a relay and switch

cheers BJ
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests