i had a 2lt but swaped it with a 3l and used the 3l clutch put it all in but now the clutch wont disengage, i have bled the system and the slave cyl moves about an inch and there is no slack in the fork. I discribed what was happining to a mechanic and he thought the clutch might have been stuck to the flywheel as the engine might have been sitting for a while.
i started it in 1st put the clutch in and brake on to try to make it slip but both front wheels just skidded.
if anyone has any ideas i would be greatfull otherwise tomorow i drop the box
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch issues
Moderators: toaddog, TWISTY, V8Patrol, Moderators
clutch issues
if you aint covered in mud you aint trying hard enough
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
90 surf ssr ltd
Suspension lift
front lokka
Rear lockright
31" ATs and more to come
Who is online
Users browsing this forum: No registered users and 0 guests