Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Help

Post by Struth »

My VT V8 (in my 4 Runner) is almost ready to go, but no spark when cranking and trying to start.

I have tested the coil, OK.

The negative wire from the coil should connect to the ignition module of the computer. It is a brown wire and I cannot get continuity from the wire at the distributor to any of the brown wires on the computer plugs. I suspect the wire is broken.

So far pretty easy electrics.

My question is which of the three plugs that go into the computer is the ignition module plug.

I am concerned that if I put a jump wire in to replace what i suspect is a damaged brown wire in the loom I may blow the computer if I get it wrong.

Also any links to commodore sites would be helpful too.

Thanks.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests