Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how do u get rear shackles bushes out of the chassis?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 138
Joined: Mon Nov 13, 2006 9:24 pm
Location: Albany Creek, Brisbane

how do u get rear shackles bushes out of the chassis?

Post by 4WD WOG »

how do u get rear shackles bushes out of the chassis on a mq/k?

their in their real good, looks like the only way is to cut them out?
93 GQ LWB
4.2 Petrol
2" Spring
2" Body
Custom Front Tube Bar
2 1/2" Exhaust
Pioneer MP3
Posts: 239
Joined: Thu Aug 07, 2003 2:27 pm
Location: Mongol land

Post by GeneralFubashi »

gas axe, or even a little butane torch will do if you have some patience.
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

wd overnight, and also grease aound the edges. then a lump hammer... and try to use a drift.

good luck
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 80
Joined: Sat Jul 14, 2007 5:41 pm
Location: Sunshine Coast, QLD

Post by terra88 »

Use an oxy and heat the outside area , then should be able to use a drift (preferably brass) to hammer it out ... Good luck
Its NOT A FORD Its a NISSAN ....

[url=http://www.4wdmonthly.com.au/shed/index.php?id=2292&im=1]92MAV[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests