hi all first post, new to this stuff, have searched but can not find so thought i would ask, just brought a rear maxi drive now i just need to know how to wire the switch and vaccum for the activation.
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
maxi drive setup
Moderator: Micka
12v to one side of indication lamp, the other side goes to the plug on the maxi housing
You need to take vacuum from the port on the inlet manifold, the one I taped up, run it to your vacuum switch, the other 2 hoses go down to the servo on the housing
Forgot to charge you for the diff's
oh well 
had it driving yet?
You need to take vacuum from the port on the inlet manifold, the one I taped up, run it to your vacuum switch, the other 2 hoses go down to the servo on the housing
Forgot to charge you for the diff's
oh well had it driving yet?
Wanted: Car trailer or beaver tail truck, let me know what you got
Who is online
Users browsing this forum: No registered users and 0 guests