ahhhhh ShortyIQ trying to rip out the old 4.2 petrol engine out of the gq but the bellhousing and the motor don't want to unjoin..... there is a 20-30mm gap between the 2 and there is a fair amount of play...
Had the mechanic just over on his way home from work and his opinion is that it is possible that the spigot bearing is siezed onto the drive shaft preventing the removal...
Which means either getting to the clutch plate screws somehow or ripping the dong out with the gearbox.
Can anyone give some advice or share some expirences?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Taking the motor out of the GQ... Out with the old in '08
Taking the motor out of the GQ... Out with the old in '08
Don't expect to see my recipe, until I receive my cheque and collection fee
Who is online
Users browsing this forum: No registered users and 1 guest