Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Recovery points - mount on passenger or driver side?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5
Joined: Thu Jun 28, 2007 9:42 pm

Recovery points - mount on passenger or driver side?

Post by Pixie »

Hi people!!

What a great site you have here. I have been reading threads for some time now but now I come seeking some advice for myself.

I have bought a single TJM recovery point for my GQ (no winch if that matters). One of those 10mm thick flat steel plates which bolt on to the rails where the bullbar also bolts on.

I do an occasional bit of light 4WDing, some track and beach work but nothing too extreme. I have opted to fit only a single recovery point at the front of the vehicle. My question is, which is the better side to attach the plate? driver or passenger side.

I considered that in recovery situations there will always be a driver so if there is a chance of something breaking during recovery then it would be best to direct the force towards the passenger side which might be vacant at the time (don't tell my wife I said that though :? ). Then I thought that perhaps having the recovery point on the driver side would give better vision during a recovery process.

Then again perhaps there's an even better reason for one side or the other. Perhaps it doesn't matter at all - but I thought that i would ask the question

Any advice on this matter would be appreciated. Thanks
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

GQ factory mount is driver's side
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

I really don't think it matters. two points is better to allow for slight adjustment of angle of pull, or one may be un-useable for various reasons, but i'm clutching at straws here.

By your thinking, the passenger side sounds like a slightly better idea if you're only going to have one.

-Stu :)
Top
Posts: 109
Joined: Sat Jul 08, 2006 11:31 am
Location: Rockingham, Western Australia

Post by gorilla »

mount on both sides, and use a bridle between the two, reduces the chances of twisting the chassis.
GQ leafy ute - TD42, 2" lift, parabolics up-front, dove tail tray and 37" IROKs
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

gorilla wrote:mount on both sides, and use a bridle between the two, reduces the chances of twisting the chassis.
And if one lets go, the bridle will catch the shackle/chunk of metal (unless they both go at the same time)
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Go the passenger side , if any recovery gear breaks , hoefully it will go the passenger side and not hit you , passenger empty during recoverys , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 5
Joined: Thu Jun 28, 2007 9:42 pm

Post by Pixie »

Thanks for the tips people

Much appreciated :)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 167 guests