Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting standard rear springs to the front end of a hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 630
Joined: Mon Aug 20, 2007 8:09 pm
Location: Ormeau QLD

Fitting standard rear springs to the front end of a hilux

Post by dirtfix »

Hey all, i want to fit these standard rear hilux springs to the front end of my solid axle 1986 YN67 hilux and need some help and information on the topic before i go ahead. I have heard it gives you a better approach angle due to moving the diff forward 50mm so i know i will need a driveshaft spacer if this is correct. But what else? I like to be prepared to do the entire job in one hit without all the little surprises so i am asking if anyone has done this before to let me know whats involved in the operation and also what the advantages/disadvantages of this modification are. Any help would be greatly appreciated. Cheers,
Dirtfix! ;)
Lifes tough, be tougher!
1984 Hilux Dual cab LN65
Old School Flavour!
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Honestly hi steer and extented shackles and longer front shaft or a rhs one and a mod plate. If you want to waste money and Don't mind being defected by DOT. Shorter draglink, Adj torqure rod and longer front shaft.
plenty of parts on the bench
Top
Posts: 630
Joined: Mon Aug 20, 2007 8:09 pm
Location: Ormeau QLD

Post by dirtfix »

Definately dont have money to waste, and dont want to be hassled by DOT so what are my options?
Lifes tough, be tougher!
1984 Hilux Dual cab LN65
Old School Flavour!
Top
Posts: 706
Joined: Fri Dec 31, 2004 10:31 am
Location: some where between armidale and sydney.....

Post by TYLER »

haha, yea deffo go the high steer, probly need caster plates, cos you still get a bit of wabbel
[b][i][u][color=#0000BF] just another nutter with a hilux [/color][/u][/i][/b]
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

highsteer aprrox 900
longer shaft 500
new ps box 300ish
new lines ? 100?
extended's 175 from superior
castor plates 80 od bucks
definetly shocks 250 rancho's

thats rough parts lift using all new gear approx 2 grand? :armsup:
i no what i spend me coin on instead :armsup:
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

oh and mod plate and call out fee 250ish dan??
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 630
Joined: Mon Aug 20, 2007 8:09 pm
Location: Ormeau QLD

Post by dirtfix »

Righto then! Project officially abandoned! I have just ordered custom body lift blocks with Dirtfix etched on em, BLING! :armsup: Wanna customise some springs for me Chris? :D
Lifes tough, be tougher!
1984 Hilux Dual cab LN65
Old School Flavour!
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Lux_89 wrote:highsteer aprrox 900
longer shaft 500
new ps box 300ish
new lines ? 100?
extended's 175 from superior
castor plates 80 od bucks
definetly shocks 250 rancho's

thats rough parts lift using all new gear approx 2 grand? :armsup:
i no what i spend me coin on instead :armsup:
Or buy from the states.

http://www.trail-gear.com/steering-rhd.html
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

TYLER wrote:haha, yea deffo go the high steer, probly need caster plates, cos you still get a bit of wabbel
caster plates???
wedges I think you mean :D
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Don't put wedges under, go dropped front crossmember. Wedges are for eating with sour cream. :finger:
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

m

Post by sloshy »

Willy Hilux wrote:Don't put wedges under, go dropped front crossmember. Wedges are for eating with sour cream. :finger:
I got both :finger:
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests