Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

33x12.5 it is ok for a 3.5 V6 enginee with a 4.27 diff ratio

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 40
Joined: Sun Aug 12, 2007 3:29 am
Location: Chile, South America

33x12.5 it is ok for a 3.5 V6 enginee with a 4.27 diff ratio

Post by caxtrol »

Somebody has this configuration in his Mitsu with 3.5 V6 enginee with a 4.27 diff ratio????

May you give me yours comments ???

Thanks

Caxtrol
Posts: 69
Joined: Thu Jul 26, 2007 12:55 pm
Location: Crawlorado, USA

Post by CapnCrunch »

Before I got 5.29 diff gears, I ran 33x12.5 tires with 4.625 diff gears, a 2.6L engine, a bad carb, and at high altitude (where I live is 6500 feet and I'd usually be driving between 5000 and 8000 feet) for almost a year. I got by with it but it was painful on the highway or climbing hills.

With both the new carb and the new gears, there is no issue. With a 3.5L you should be fine.
Last edited by CapnCrunch on Mon Dec 31, 2007 2:30 am, edited 1 time in total.
Joe
88 Montero (Pajero) 2.6L 5-speed - dual-locked, low-geared, armored, lifted, lit, rigged for dive... [img]http://www.fivethirty.com/images/blah.gif[/img]
Posts: 193
Joined: Tue Nov 13, 2007 7:11 pm
Location: NZ

Post by WACKO »

im sure they will work, but wont be the best set up. if its a 3.5 you would be best trying to find some 4.9s. but you will be able to use them, you may just find it doesnt quite have enough "kick" as it were.
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
Posts: 114
Joined: Mon Apr 11, 2005 4:18 pm
Location: sucks

Post by toastmaster »

i ran 35x13.5's with 4.27's on my '99 3.5l lwb for about a year and i didn't have any problems but i swapped in a set of 4.90's and it helped onroad a bit but it would have been better if i had stuck with the 4.27's and swapped in a t-case instead.
Sneaky ninja action!
Posts: 40
Joined: Sun Aug 12, 2007 3:29 am
Location: Chile, South America

Post by caxtrol »

but it would have been better if i had stuck with the 4.27's and swapped in a t-case instead.

Why toastmaster ???

What happens if I run 32x11.5 with my V6 3.5 and 4.27 Diff Ratio ???

or 31x12.5 ???

I found a Front 4.9 Diff Ratio here in Chile, but I can not find yet 4.9 rear diiff ratio.

What do you recomend, maintain 4.27 Diff Ratio with 32x11.5 or 31x12.5 or swap 4.27 Diff Ratio by 4.9 and use 33x12.5 ???

Thanks

Caxtrol
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

I think 1st you need to decide what size tyres you want to run adn what to use the vehicle for.

Then consider what will be the options, 4.27 would be ok off road with 33's if you get transfer gears. You could probably put up with it on road but it will be no rocket.

If you don't need 33's then run with 31's as you mentioned. Each progressive increase in size you will notice through the accelerator pedal and fuel economy.

4.27 and 33's with no transfer gears would be very unplesant off road.

My view
If you are using it off road and not in a hurry on road then 33's + low gears. (std diffs)

Off road and good on road - 33's + t case gears + 4.9 diffs.

Moderate off road - 33's + 4.9 diffs

Little off road - 31's + std.

I run 33's and had 4.636 diffs then went to 4.9 diffs, mainly for restoring on road power.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

I have 33"s + 4.636 + 3.15 t/case gears in a 5sp 3.5 DOHC.
On road = fine
Offroad = fantastic
IMHO 4.27's would be horrible onroad and not much better offroad with 33"s.
31-33" = 4.636
35" = 4.90
But everyone is different I guess, why not borrow a set of 33"s from a mate to try out ?
I just luv my "clacker Jabber"
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

5.29 :cool: :armsup:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

i miss driving my paj :cry:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

Post by klrevo »

NJV6 wrote: 4.27 and 33's with no transfer gears would be very unplesant off road.
i only realised just before i sold it that my shorty had the 4.6 centres, and not the 4.88 i always thought it did... :oops:

drove it that wya for 2 yrs i had it because i couldnt really go lower, but in fact i could, and that was the 3.0L with no tranny gears, it went everywhere i wanted it to and drove it everyday and even miss it now its gone,

too bad iv got 5.29, solid front, lockers, tranny gears now :lol:

its a different world, but definately horses for courses, the new paj is high, slow but VERY capable. I would definitely now say, like every else, figure pout what you want and buid from there.

some people would definitely not be happy driving my new paj, but i can live with it :D

dean ;)
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

klrevo wrote:
some people would definitely not be happy driving my new paj, but i can live with it :D

whats wrong with it Dean?
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests